What are you working on now?

[23Zen23]

OMG! Again something to thinking about nice idea

[Denis]

Amuthon this is Can you share process:)

[dj57]

I always wanted to have a B-Uhr that is not as big as my LACO Hommage ….

… and more accurate than my flieger with sub seconds.

So I changed my spares parts and I found a watch case (not that nice), a Molnija “Ural” wristwatch with 3608 Movement, a type B dial and some hands…





… so let’s get started…













I know the movement has to be cleaned and regulated but first things first. Also if I am going to like the result then I am planning a little a vintage mod on dial and hands. You know „a little mod, why not“.

[Elias Livadaris]

Brother, be awarw that all 3608 movements have the shattering effect on the seconds hand. This means that you will see at some positions the hand to jumb 2-3 seconds. But that's all right.

[dj57]

Brother, be awarw that all 3608 movements have the shattering effect on the seconds hand. This means that you will see at some positions the hand to jumb 2-3 seconds. But that's all right.

Ευχαριστώ
I know this but many thanks for keeping me/us informed.

[Yoda]

Just tighten the spring under the seconds hand pinion and all is good. Be careful when you set the seconds hand, it can compromise the tension on the spring.

[dj57]

Just tighten the spring under the seconds hand pinion and all is good. Be careful when you set the seconds hand, it can compromise the tension on the spring.

[dj57]

Dial and hands vintage mod done

[Yoda]

Dial and hands vintage mod done

Perfect!

[Denis]

Dj57 I watch very carefully, you did a great job, congratulations