Page 1 of 2
custom hands
Posted: July 19th, 2019, 5:47 am
by tafari
who will be the best for doing some custom hands?
I want to use mercedes hands for a custom build

the hands are for a eta 2801-2, hole size is 1.50, 0.90 , 0.25mm.
this hands are a lot on ebay but there are to short 8.5, 12, 12mm.
I need them with a length of 10, 14, 14mm (measure from hole middle to end)
any suggestions?
thanks for help
Re: custom hands
Posted: July 19th, 2019, 7:04 am
by hako
I would ask Ross.
Have you scanned often, cousins and wenping1970?
Slim chance only in this length.
Tiger would be an option too, but I think they offer nothing larger than 12mm
Re: custom hands
Posted: July 19th, 2019, 7:16 am
by tafari
hako wrote:I would ask Ross.
Have you scanned often, cousins and wenping1970?
Slim chance only in this length.
Tiger would be an option too, but I think they offer nothing larger than 12mm
I search the web alot but couldnt find anything larger than 12mm
I thought about Ross too, I have to pm him
Re: custom hands
Posted: July 19th, 2019, 8:10 am
by Mellons
Rafflestine has zerograph hands i think might be longer?
Re: custom hands
Posted: July 19th, 2019, 8:25 am
by tafari
mellons wrote:Rafflestine has zerograph hands i think might be longer?
thanks, but still to short 12.6mm
Re: custom hands
Posted: July 19th, 2019, 9:04 am
by aris.dayton
yeah, just pm Ross
Re: custom hands
Posted: July 19th, 2019, 9:39 am
by tafari
aris.dayton wrote:yeah, just pm Ross
jus now Id send him a pm, waiting for an reply
Re: custom hands
Posted: July 19th, 2019, 10:34 am
by Sevanata
Ross made it for me.
You have to broach it yourself.
Sent from my iPhone using Tapatalk
Re: custom hands
Posted: July 19th, 2019, 2:52 pm
by tafari
there are great, I never did the broaching of hands. look some vids for broaching and with the right tools it’s possible to do. only Im afraid of the second hand it would be better to make it in a tube. but not easy to find a 0.25mm inner diameter tube

maybe use from some other 2824 hands
Re: custom hands
Posted: July 20th, 2019, 3:07 am
by Emilio
tafari wrote:there are great, I never did the broaching of hands. look some vids for broaching and with the right tools it’s possible to do. only Im afraid of the second hand it would be better to make it in a tube. but not easy to find a 0.25mm inner diameter tube

maybe use from some other 2824 hands
Ross make hands with a small hole in them so that might be enough for fitting the seconds hand.