Page 25 of 535
Re: What are you working on now?
Posted: September 17th, 2019, 11:28 pm
by hako
Yep:-), you nailed it!
Re: What are you working on now?
Posted: September 18th, 2019, 12:15 am
by tafari
toofsy wrote:Emilio wrote: ↑September 17th, 2019, 11:04 am
toofsy wrote: ↑September 17th, 2019, 10:56 am
Made by Athaya, who has the file from my first miniegi, and paint by myself.
Oh, I once received a dial for the mini egi from Athaya but the subdial alignment was off.
Have you checked the clearance?
grrrrrrrrrrr not yet, I was confident regarding the first experience...I'm going to check
I have a doubt...not sure but the second pin seems to touch the edge of the second hole when the hour/min pin seems centered. I will try to assemble it on tomorrow...
that woukd be bad,the finish looks very great
Re: What are you working on now?
Posted: September 18th, 2019, 7:12 am
by toofsy
tafari wrote: ↑September 18th, 2019, 12:15 am
toofsy wrote:Emilio wrote: ↑September 17th, 2019, 11:04 am
Oh, I once received a dial for the mini egi from Athaya but the subdial alignment was off.
Have you checked the clearance?
grrrrrrrrrrr not yet, I was confident regarding the first experience...I'm going to check
I have a doubt...not sure but the second pin seems to touch the edge of the second hole when the hour/min pin seems centered. I will try to assemble it on tomorrow...
that woukd be bad,the finish looks very great
thanks...bingo, everything is ok, no friction the second hand run well, but it true the clearance is not perfect maybe 0,5mm. I will have to fix tightly the dial
IMG_20190918_135939.jpg
Re: What are you working on now?
Posted: September 18th, 2019, 8:56 am
by bmsm
Working on a wood box. Just learning how make them.
Sent from my iPhone using Tapatalk
Re: What are you working on now?
Posted: September 18th, 2019, 11:13 am
by Erick510
jrlmsla wrote:My first crayon fill:
How did you get it to look so clean?
Sent from my SM-N920P using Tapatalk
What are you working on now?
Posted: September 18th, 2019, 12:39 pm
by jrlmsla
Erick510 wrote:jrlmsla wrote:My first crayon fill:
How did you get it to look so clean?
Sent from my SM-N920P using Tapatalk
Slightly heated up the dial from behind to allow wax to get in easier.
Scraped off excess with thumbnail tool
Qtip in alcohol cleaned up a bit
Re: What are you working on now?
Posted: September 18th, 2019, 12:45 pm
by Yoda
jrlmsla wrote: ↑September 17th, 2019, 8:57 pm
My first crayon fill:
Perfect! There is a little residue left, but it is damn nice!
Re: What are you working on now?
Posted: September 18th, 2019, 12:46 pm
by Yoda
bmsm wrote: ↑September 18th, 2019, 8:56 am
Working on a wood box. Just learning how make them.
Sent from my iPhone using Tapatalk
Good job, looks nice! Wax and you are done!
Re: What are you working on now?
Posted: September 18th, 2019, 3:00 pm
by bmsm
Yoda wrote:bmsm wrote: ↑September 18th, 2019, 8:56 am
Working on a wood box. Just learning how make them.
Sent from my iPhone using Tapatalk
Good job, looks nice! Wax and you are done!
Thank you. That is my next step
Sent from my iPhone using Tapatalk
Re: What are you working on now?
Posted: September 19th, 2019, 8:17 am
by Alhig72
