What are you working on now?

[Tanukjaju]

[Tanukjaju]

@EP.- is the lens flat on the inside or curved also?

[spade_lt]

https://es.aliexpress.com/item/1005003693799390.html

Wow, very nice idea!

I have to do that!

[EP.-]

Is this case from Ali?Shipping to EU is difficult i suppose because of the customs?

Στάλθηκε από το Redmi Note 8 Pro μου χρησιμοποιώντας Tapatalk

Yes, the case is from aliexpress. It came to Spain well.
https://es.aliexpress.com/item/1005003445919053.html

[EP.-]

@EP.- is the lens flat on the inside or curved also?

It is flat.

[Kp0y]

Do not need to sand it
need to use freezer for instalation

[Tanukjaju]

@EP.- is the lens flat on the inside or curved also?

It is flat.

So you will have to make a special dial with smaller index diameter?

What’s the plan for the dial?

[EP.-]

So you will have to make a special dial with smaller index diameter?

What’s the plan for the dial?

I'll use a normal dial. Both the dial and the hands will be magnified. I hope there is room for the hands, because the sapphire was double curved. I have to check this.

[EP.-]

Do not need to sand it
need to use freezer for instalation

I had to sand down about 2mm around.
It was difficult to keep the circular shape.
It keeps in place by pression, but I need to glue it to be sure it will be waterproff.

[Denis]

You must somth broke to be repaired new:)

After all beat error is horrible:( I replace some parts, stowa cal. 220 and ut 275 is compatible with parts and balance but different with bridge position, stowa is hunter, ut is lepine.. I have plan to put this stowa in wirst case, but now I'm not sure.. Simple is not enough good..