What are you working on now?

[Mike08]

Screenshot_20220214-141326_Gallery.jpg

What hands and engine? Can we see a naked pic of the dial?!

I think I build it with Unitas 6497, because all my other builds have Cort 616...
I want a reliable workhorse here
Hands then will be Tourby thin pencil.

20220214_184311.jpg

[Harzach]

Another 47mm Egi with Unitas ...

IMG_3474.jpeg

IMG_3476.jpeg

Harzach

[Mike08]

Another 47mm Egi with Unitas ...

IMG_3474.jpeg

IMG_3476.jpeg

Harzach

Wow
But why do you need to enlarge the inside for Unitas?

[tafari]

finished a strap for my brothers 6152

[Harzach]

But why do you need to enlarge the inside for Unitas?

The diameter for the automatic movement is too small to take a Unitas.

And the Unitas is also thicker, you have to put it deeper into the case, therefore you also have to cut the enlarged diameter deeper into the case.
And you have to cut away a part of the caseback for the Unitas to fit..

So some machining is needed to switch the movements.

Harzach

[Mike08]

But why do you need to enlarge the inside for Unitas?

The diameter for the automatic movement is too small to take a Unitas.

And the Unitas is also thicker, you have to put it deeper into the case, therefore you also have to cut the enlarged diameter deeper into the case.
And you have to cut away a part of the caseback for the Unitas to fit..

So some machining is needed to switch the movements.

Harzach

Didn't know that its that complicated with the 47mm Egi...
For what movement are they made?

[Harzach]

They do come with a small Chinese automatic movement.
I have no idea how they are named, I put it into the trash on arrival of the watch

Harzach

[Mike08]

But it's really great what you can do

[Harzach]

IMG_3473.jpeg

[Nottingham]

finished a strap for my brothers 6152

Nice color and contour Mate!