What are you working on now?

[Yoda]

after 3 days, I was fighting with a cortebert 616, with a damaged hairspring ( looks like a tube). squeezing here and squeezing there today after adjusting the offbeat, the result. God bless it perform with great results again and with a offbeat of 0.3ms I can life

Not bad check if hairspring is touching somewhere at regulator pin or similar...
Good amplitude, what lift angle?

Sent from my LG-D855 using Tapatalk

It's just drunk! It will be fine in the morning.

[djolemag]

after 3 days, I was fighting with a cortebert 616, with a damaged hairspring ( looks like a tube). squeezing here and squeezing there today after adjusting the offbeat, the result. God bless it perform with great results again and with a offbeat of 0.3ms I can life

Not bad check if hairspring is touching somewhere at regulator pin or similar...
Good amplitude, what lift angle?

Sent from my LG-D855 using Tapatalk

It's just drunk! It will be fine in the morning.

No, it is ok for old movement. Sinusoidal shaped graph could be caused by many things, like some minor wear on seconds wheel pinion, tired material of mainspring... Who knows what exactly...
Generally, I prefer to change mainspring whenever I have a chance

Sent from my LG-D855 using Tapatalk

[tafari]

Not bad check if hairspring is touching somewhere at regulator pin or similar...
Good amplitude, what lift angle?

Sent from my LG-D855 using Tapatalk

It's just drunk! It will be fine in the morning.

No, it is ok for old movement. Sinusoidal shaped graph could be caused by many things, like some minor wear on seconds wheel pinion, tired material of mainspring... Who knows what exactly...
Generally, I prefer to change mainspring whenever I have a chance

Sent from my LG-D855 using Tapatalk

maybe the mainspring is the issue, I want to replace it but a silver one was inside and I have a blue one. so I decided to use the old one and to order the correct one and if it arrives, I will change it. unlucky the ones Yoda was selling already gone

[tafari]

yes...perfect fit

perfect job, for which movement?

big simple german movement (43,6mm)

its not a gen movement or, I think them are bigger

[djolemag]

It's just drunk! It will be fine in the morning.

No, it is ok for old movement. Sinusoidal shaped graph could be caused by many things, like some minor wear on seconds wheel pinion, tired material of mainspring... Who knows what exactly...
Generally, I prefer to change mainspring whenever I have a chance

Sent from my LG-D855 using Tapatalk

maybe the mainspring is the issue, I want to replace it but a silver one was inside and I have a blue one. so I decided to use the old one and to order the correct one and if it arrives, I will change it. unlucky the ones Yoda was selling already gone

Try with blue one in the meantime, you can notice difference anyway, that can be a good clue...

Sent from my LG-D855 using Tapatalk

[djolemag]

yes...perfect fit

perfect job, for which movement?

big simple german movement (43,6mm)

What is a case diameter then?

Sent from my LG-D855 using Tapatalk

[Yoda]

perfect job, for which movement?

big simple german movement (43,6mm)

What is a case diameter then?

Sent from my LG-D855 using Tapatalk

Must be 55mm or more.

[slpf]

big simple german movement (43,6mm)

What is a case diameter then?

Sent from my LG-D855 using Tapatalk

Must be 55mm or more.

Ja,55mm

[Yoda]

What is a case diameter then?

Sent from my LG-D855 using Tapatalk

Must be 55mm or more.

Ja,55mm

Genau!

[Yoda]

yes...perfect fit

perfect job, for which movement?

big simple german movement (43,6mm)

Alles klar denn? Welche uhrwerk?