The perpetual wrist shot thread

[wwwEvgeny]

Nice indexes!!! and buy the way, how did you solved the small seconds hand, did you extend the pivot or just long tube? Maybe I'm over worrying, my bronze tube not seams safe enough, maybe need to try steel one.

Thank you very much. The dial was done by the good old NW (lume and resin too). So it is not me to credit for. The small second is the long tube second hand from athaya that I shortened and then pinched installed on a second wheel. The fitting is tight and safe. I’m actually working on a build report how to fit the SF240 in the new NW clone case. Sadly I could never acquire the real deal as NW closed down his operation. The Bronze tube (NW too) as it isn’t sondert is screwed in and sealed with an epoxy that is called Liquid Metal.
I’m over the moon with this build because when I started to read through the forum I never thought I would once own an SF240 homage.


Gesendet von iPhone mit Tapatalk

thank you for your reply. as I finish my custom decorated 3646... probably I will continue my a240 parallel to it. I stuck with it as my small second hand was not fitted tightly enogh. will just finish without it first. my a240 waiting for years, its time to move it. )))

[NortON]

20250202_093140.jpg

This build is soooo beautiful. The patina is exceptional.


Gesendet von iPhone mit Tapatalk

Thank you friend! Your beautiful 6152 1 with A240 reminds me that I need to work

[wwwEvgeny]

20250202_093140.jpg

This build is soooo beautiful. The patina is exceptional.


Gesendet von iPhone mit Tapatalk

Thank you friend! Your beautiful 6152 1 with A240 reminds me that I need to work

Put your project here and it will move faster )) as we will ask how it is going

[Nottingham]

Have a good one Guys

[wwwEvgeny]

bought it for tuning, but no time, so just can ware it some time

Sent from my SM-S9080 using Tapatalk

[NortON]

This build is soooo beautiful. The patina is exceptional.


Gesendet von iPhone mit Tapatalk

Thank you friend! Your beautiful 6152 1 with A240 reminds me that I need to work

Put your project here and it will move faster )) as we will ask how it is going

it's not that simple...