What are you working on now?

Amuthon · Post by **Amuthon** » April 1st, 2023, 6:39 am

Upgrading the monster buckle with a chopped bead skull...

Gesendet von meinem Mi 9 Lite mit Tapatalk

Kkstraps · Post by **Kkstraps** » April 1st, 2023, 10:49 am

Denis wrote: ↑March 30th, 2023, 1:51 am this strap looks very nice.

Kkstrsps thank you 1000 times when you say it, because I watched your works with great attention and enjoyment:

gratitude 1000 times is not necessary. I'm an ordinary guy! and not afraid of competition! let them change and be afraid

if there are any difficulties with the manufacture of straps I am happy to share my experience with you and help you in any way.

Post by **Mellons** » April 1st, 2023, 3:32 pm

Amuthon wrote: ↑April 1st, 2023, 6:39 am Upgrading the monster buckle with a chopped bead skull...

Gesendet von meinem Mi 9 Lite mit Tapatalk

Wow!

Denis · Post by **Denis** » April 2nd, 2023, 6:48 am

Kkstraps wrote: ↑April 1st, 2023, 10:49 am [quote=Denis post
gratitude 1000 times is not necessary. I'm an ordinary guy! and not afraid of competition! let them change and be afraid if there are any difficulties with the manufacture of straps I am happy to share my experience with you and help you in any way.

Kkstrsps thank you For now I have a plan to try to make a couple of straps for my watches.. It's not small numbers I also ordered some tools for processing leather.. I will be free to ask for help

Amuthon · Post by **Amuthon** » April 2nd, 2023, 6:59 am

There wasn't enough space for a stem adaptor,
so I had to cut 0,9mm thread on a 1,2mm stem. Tricky stuff, needed two attempts, crown is on and working

Gesendet von meinem Mi 9 Lite mit Tapatalk

Post by **Yoda** » April 2nd, 2023, 7:33 am

Amuthon wrote: ↑April 2nd, 2023, 6:59 am There wasn't enough space for a stem adaptor,
so I had to cut 0,9mm thread on a 1,2mm stem. Tricky stuff, needed two attempts, crown is on and working

Gesendet von meinem Mi 9 Lite mit Tapatalk

Yes, it has to be softened before cutting the thread and then hardened again.

Denis · Post by **Denis** » April 4th, 2023, 1:33 pm

A little review.. I have never had a Molnija like this before.. The marking is 3602, but it has a lot of elements of 3601.. I guess it is a transitional model.. Year of manufacture 2-66 I just serviced it and it is very precise in all positions.. New my experience was regulation and disassembly of the balance.. She had a problem with magnetism..

Post by **Yoda** » April 4th, 2023, 2:14 pm

Good job there! Tweezers number 5?

Denis · Post by **Denis** » April 5th, 2023, 4:14 am

Yoda wrote: ↑April 4th, 2023, 2:14 pm Good job there! Tweezers number 5?

Thanks Yoda:) Yes, number 5, only for fine works

Post by **Yoda** » April 5th, 2023, 4:31 am

Denis wrote: ↑April 5th, 2023, 4:14 am
Yoda wrote: ↑April 4th, 2023, 2:14 pm Good job there! Tweezers number 5?
Thanks Yoda:) Yes, number 5, only for fine works

It's my favourite when taking apart and putting together.

Frequent Flyer

HF veteran

Good neighbour

Frequent Flyer

Strap maker

MM perv

Microbrand guru

5 year veteran

Frequent Flyer

Moderator

VIP

Prolific poster

HF veteran

Italiano addict

Skillful builder

Good neighbour

Frequent Flyer

Frequent Flyer

HF veteran

Good neighbour

Mini Chat Squatter

Car lover

Bike lover

Knife maker

Animal

5 year veteran

Frequent Flyer

VIP

Prolific poster

HF veteran

Watchmaker

Good neighbour

Frequent Flyer

Mini Chat Squatter

Car lover

Bike lover

Knife maker

Animal

5 year veteran

Frequent Flyer

VIP

Prolific poster

HF veteran

Watchmaker

Good neighbour

Frequent Flyer

Mini Chat Squatter

Car lover

Bike lover

Knife maker

Animal

5 year veteran

Frequent Flyer

VIP

Prolific poster

HF veteran

Watchmaker

Good neighbour