Page 1 of 1
Angelus SF 240 questions
Posted: March 3rd, 2021, 6:32 am
by tatham
Here you can see a straight toothing on a 240:
Here is a Cortebert with the well-known helical toothing.
How is it correct on original Pam's with the SF 240 with crown winding? Straight or sloping?
Where do you get the winding pinion and the sliding pinion for the SF 240?
Re: Angelus SF 240 questions
Posted: March 3rd, 2021, 7:18 am
by Madantique
That's one for alarm type for winding two way.
Re: Angelus SF 240 questions
Posted: March 3rd, 2021, 7:24 am
by Emilio
tatham wrote: ↑March 3rd, 2021, 6:32 am
Here you can see a straight toothing on a 240:
Here is a Cortebert with the well-known helical toothing.
How is it correct on original Pam's with the SF 240 with crown winding? Straight or sloping?
Where do you get the winding pinion and the sliding pinion for the SF 240?
Not sure about the correctness of the sliding pinion but [mention]Chileantiques[/mention] sells those. He posted a thread:
viewtopic.php?f=5&t=3829
Re: Angelus SF 240 questions
Posted: March 3rd, 2021, 7:49 am
by Emilio
on that thread, you can see that non-alarm movements had the sliding pinion.
Re: Angelus SF 240 questions
Posted: March 3rd, 2021, 12:31 pm
by Yoda
As far as I know, Jorge is only offering the winding pinion as it works well with the clutch wheel.
Only BUT is that the steel used is a bit soft....
Re: Angelus SF 240 questions
Posted: March 3rd, 2021, 1:29 pm
by tatham
Thanks everyone for the information!
