Homage Forum

Thanks to [mention]Roberespi[/mention] for contacting the seller and making this possible.

A collection of Steeldive parts for replacing on your Ploprof homage. Right now you can get the CG, bezel insert and dial.

I've been told that sterile parts might be available too.

https://a.aliexpress.com/_BP6DHp

take care about the measurements:

Ceramic bezel size: 40.90*31.70*1.00mm（exterior diameter*interior diameter*thickness）

Surface size: 32.8*32.5*31.5*0.4mm (wire hole*face diameter*open Surface * thickness)

Bezel size: 41.8*32.7*2.2mm (outer diameter * inner diameter * thickness)


Enviado desde mi iPhone utilizando Tapatalk

If someone needs a ploprof v1 case i have a spare one, pm to me


Enviado desde mi iPhone utilizando Tapatalk

Roberespi wrote: take care about the measurements:

Ceramic bezel size: 40.90*31.70*1.00mm（exterior diameter*interior diameter*thickness）

Surface size: 32.8*32.5*31.5*0.4mm (wire hole*face diameter*open Surface * thickness)

Bezel size: 41.8*32.7*2.2mm (outer diameter * inner diameter * thickness)


Enviado desde mi iPhone utilizando Tapatalk

That's great. Will come in handy

Roberespi wrote: ↑January 14th, 2021, 7:22 am If someone needs a ploprof v1 case i have a spare one, pm to me


Enviado desde mi iPhone utilizando Tapatalk

Have you taken one apart? Would be interesting to see parts...

I started the ploppy project, but a new finished ploprof appears and i had buy it. If someone has the patience to continue the project, we can talk. I am in Spain.

The only parts that i not have is the DWO and the bezel insert (the one in the photos is not the correct one), too i have the swiss eta 2836 and the 3 wheels to make longer the hands axle.

It is v1 parts except the dial witch is a v2 one (no happy feet in it)




Enviado desde mi iPhone utilizando Tapatalk

Do you sell the dial?

It is all sold, sorry


Enviado desde mi iPhone utilizando Tapatalk