Homage Forum

Dears ,

Currently I am on sick leave ( several knee surgeries ) and having plenty of time for thinking and designing , now I am working a diver model build on 3646 mid case , bidirectional bezel non case back crown at 12 etc , I just became a customer of ETA but they stopped the production of 6487-2 and run out of stock , I am checking with Sellita and STP watch company , STP also accepted my customer request , My heart says Sellita but wanted to ask to you guys , can you recommend me some movements which you want to see in a nice watch ?

Bests

I have heard that Selitta has had quality issues and that 200.000 movements were withdrawn....

Oh, I hope that you will have a swift recovery!

ouch , I have been checkin all the reviews etc but didn't saw such article , thanks Yoda , I will dig deeper , any idea about the type of the movement which had issues ?

I'm not an expert on that. The case it's big, but I recently saw a long list of micro brands using the ETA 7001. Its a small movement for that 3646 mid case, but it's my 5 cents for this thread

Have a fast recovery.

I would contact Dan from OWC.
I guess he has a lot of experience how to deal best with your type of choice issue.

bmsm wrote: ↑October 29th, 2020, 5:35 am I'm not an expert on that. The case it's big, but I recently saw a long list of micro brands using the ETA 7001. Its a small movement for that 3646 mid case, but it's my 5 cents for this thread

Have a fast recovery.

actually it can be good inner soft iron case will solve the issue with small size of movement and gave great anti magnetic spec

It was the Selitta SW movements, the hairspring checked out under 40 degrees, started to slip.

means its a known issue and they fixed it their new batch ( I hope )

I hope so.

do you mean 6497-2 ?

this is the original manual wind movement that Panerai used in all its original Luminors ... 6497-2 was not so readily available back then, ETA kept a tight lock on them, and I am sure Panerai monopolized most of the inventory

6497-2 = high beat 21,600
6497-1 = low beat (more pedestrian version, cheaper and more readily available) 18,000

With or without Secs = 9

power reserves on these would be maybe 50+ hours?

even now it's hard to find 6497-2 ... but this guy usually has many variety of movements (not cheap, but all is new and genuine with this guy) .. he also has some really cool modified, anodized and skeletonized versions of those movements

https://www.ebay.com/itm/MOVEMENT-ETA-U ... SwubdfO1Dj

This version he sells is a nicer finished with CDG, polished and blue screws

6497 is a large workhorse movement to fit that case you are working on ...

5ah1n wrote: ↑October 29th, 2020, 3:58 am Dears ,

Currently I am on sick leave ( several knee surgeries ) and having plenty of time for thinking and designing , now I am working a diver model build on 3646 mid case , bidirectional bezel non case back crown at 12 etc , I just became a customer of ETA but they stopped the production of 6487-2 and run out of stock , I am checking with Sellita and STP watch company , STP also accepted my customer request , My heart says Sellita but wanted to ask to you guys , can you recommend me some movements which you want to see in a nice watch ?

Bests