Page 1 of 1

Today’s new arrival...

Posted: September 5th, 2020, 9:42 pm
by atkin68
I don’t know anything about this movement other than that it looks awesome. Bought as “not running” - but it only needed the stem set screw tightened. Then it wound up smoothly and is running strong. Alas, too big for any case I have at 41.6mm - I may have to get another 60mm Egi to find a home for it.

Image


Sent from my iPhone using Tapatalk

Re: Today’s new arrival...

Posted: September 6th, 2020, 12:15 am
by nje2791
Looks nice and clean - any idea of the power reserve?

Re: Today’s new arrival...

Posted: September 6th, 2020, 9:20 am
by atkin68
nje2791 wrote: September 6th, 2020, 12:15 am Looks nice and clean - any idea of the power reserve?
No, can't find anything on this movement. There are three Pelican movements on Ranfft, but none are remotely like this one. The watch it came out of had an unbranded dial, and I see no markings on the movement apart from "Pelican" and what appears to be a serial number - 108163. I've had it running about 16 hours.

Re: Today’s new arrival...

Posted: September 6th, 2020, 10:48 am
by redmill
Beautiful movement

Re: Today’s new arrival...

Posted: September 6th, 2020, 2:45 pm
by Yoda
I looked in my books and it appears that Pelican is the model/grade name, the movement was made by J. Roth and Cie.

Re: Today’s new arrival...

Posted: September 6th, 2020, 2:59 pm
by atkin68
Thank you [mention]Yoda[/mention] . It seems interesting that there are no markings anywhere on the ebauche to indicate the mfg. Not even "swiss".

Re: Today’s new arrival...

Posted: September 7th, 2020, 3:06 am
by Yoda
That's not very unusual really, many of these small firms didn't mark their movements, especially not when they were made for someone else.
In this case it was made by the maker and sold with their own name on it.
It appears to be made for selling outside Switzerland, it is marked both "A" and "R" plus "F" and "S" on the balance cock.

Even if it is running great, service would be the best to avoid wear.

Re: Today’s new arrival...

Posted: September 17th, 2020, 9:41 am
by atkin68
@yoda - while poking around in the ranfft archive this morning, I inadvertently stumbled upon this:

http://www.ranfft.de/cgi-bin/bidfun-db. ... &Unitas_30

Scrolling down to the 3rd and 4th images, I'm nearly convinced this is a Unitas 30. The bridge markings also match. I'm pretty excited about this find. I felt from the beginning that this movement reminded me of my 6431 - had the look and feel of a Unitas.

Re: Today’s new arrival...

Posted: September 17th, 2020, 10:49 am
by Yoda
Looks like it, good observation!

Re: Today’s new arrival...

Posted: October 8th, 2020, 7:30 pm
by ck5533
you could use a marriage case to house this beauty.

If Im allowed to post a link https://www.ebay.com.au/itm/Watch-case- ... SwUBJdGIzv