Homage Forum

Gen spec lug bars, well almost the tube is 0.5mm larger in diameter and a safety ping has been placed. (1:1) are available if needed.
25.00 a set


Tall cp sets for 3 piece gen dials

-Molly 125.00 105.00 with exchange of existing cp hr


-649x 125.00 105.00 with exchange of existing cp hr


-custom made with your cp and hr for other mvts. all are made for 6497 hands unless otherwise specified
125.00 with exchange of existing cp hr
Vintage Pam plates

-Brass nos 45.00


-Brass aged 65.00


-Aluminum 45.00


-Reverse engraved plexi with alu backing plate 65.00


Custom plate orders welcome price varies on complexity

Rolex work as well, builds, custom bezels, etc.
engravings custom serial number vintage and modern 60.00



Custom case sets made to fit your old pocket watch from your grandfather


Coming soon:
Anodized 3 piece dials and custom text option price to be determined


-Steel hands price to be determined

-Custom sandwich style dials price varies on finish and complexity

-other offerings will be posted as they come available, ie complete vintage spec builds, new parts, ect. If it's posted here it is available for immediate shipping.

this not a complete listing of offering, just the ones that are stocked and ready for shipment, other services, machining, builds, custom engraving Ie lug engraving, case back engraving etc, and custom mods are still being offered.

Great offers. Will bookmark and keep this in mind.

Nice work Joe

Cannot be happier with Joe's engraving:

neckyzips wrote: ↑April 20th, 2018, 7:53 am -649x 125.00 105.00 with exchange of existing cp hr

Sorry, if answer is obvious to others, but what height are these?
Thank you.

Which pocket watch movement does the case fit?

Sent from my Redmi Note 5 Pro using Tapatalk

Cp hr sets are made for 2mm thick gen construction dials, as for h4 h6 etc i wouyhave to calculate it.

What ccase are you refering too?

So considering the height spacing of the factory parts, that should be something like H6

I'll just leave this here for future reference:

H?____CP____HW
H1___2.65___1.65 (for 0.4mm dials)
H2___3.00___2.00 (for 0.75mm dials)
H3___3.15___2.15 (for 0.9mm dials)
H4*__3.50___2.50 (for 1.25mm dials)
...
H6___~4.3___~3.3 (neckyzips; for 2mm dials)


__________________________
* as found from factory on Bulova 16AC and maybe other 6497 variations which did use domed dials.