Homage Forum

I am puzzled:

How is the big calendar wheel moved?

Which is the uility of the upper part of the double wheel marked with the smaler arrow?

You are missing the intermediate wheel, it looks a little like a minute wheel. I turned it upside down so that you can see the pinion. Do you want one?

you're missing a big fat center gear ...

TimemiT wrote: ↑May 11th, 2019, 7:26 am you're missing a big fat center gear ...


IMG_9333.jpeg

Not in this case, the pin is there for the intermediate wheel.

was the calendar also able to be set via the stem?

TimemiT wrote: ↑May 11th, 2019, 8:31 am was the calendar also able to be set via the stem?

Yes, everything moves like an automatic watch with day/date.

Yoda wrote: ↑May 11th, 2019, 3:42 am You are missing the intermediate wheel, it looks a little like a minute wheel. I turned it upside down so that you can see the pinion. Do you want one?

Thank you very much Yoda!!
I do not need it by now. I am thinking of use the movement in a build.

EP.- wrote: ↑May 11th, 2019, 9:07 am

Yoda wrote: ↑May 11th, 2019, 3:42 am You are missing the intermediate wheel, it looks a little like a minute wheel. I turned it upside down so that you can see the pinion. Do you want one?

Thank you very much Yoda!!
I do not need it by now. I am thinking of use the movement in a build.

Ok, let me know if you change your mind down the road, it is for free as pay forward.

Thank you very much again Yoda!

TimemiT wrote: ↑May 11th, 2019, 7:26 am you're missing a big fat center gear ...


IMG_9333.jpeg

That is an interesting configuration, the calendar wheel is much closer to the center than normal. The one posted by the OP is over the edge and yours is a bit inside.