Page 1 of 1
Need Lugbar Microwelding/soldering services
Posted: April 14th, 2018, 9:03 pm
by bronzerai
Hi All,
I was working on a custom 3646 case build but I no longer have access to a drill press, torches, and soldering/brazing equipment so hoping to farm out some lug bar welding.
Material selection is a bit tricky: case is copper, brass, and nickel silver
Lug bars are bronze
2 cases, 8 holes to drill, 4 bars to weld or solder
Let me know if you'd be interested and send me a quote.
If you can solder/weld the crown tubes as well that would be plus!

Re: Need Lugbar Microwelding/soldering services
Posted: April 15th, 2018, 8:27 am
by Emilio
My jeweler can TIG weld anything. He charges me around 15-30€ per watch depending on the time required to do it.
He welded these lugs in place for me. 30€, since he had to add material to fill huge gaps and align everything.
Re: Need Lugbar Microwelding/soldering services
Posted: April 16th, 2018, 10:14 am
by Fargo
Can´t help you with welding but this case looks really cool. Remembers me of the mokume gane cases of H20 Watches.
Will this case gain patina ? Looking forward to see the finished build
Re: Need Lugbar Microwelding/soldering services
Posted: April 17th, 2018, 12:07 pm
by bronzerai
Emilio wrote: ↑April 15th, 2018, 8:27 am
My jeweler can TIG weld anything. He charges me around 15-30€ per watch depending on the time required to do it.
He welded these lugs in place for me. 30€, since he had to add material to fill huge gaps and align everything.
Good to know, I've got a jeweler/instructor willing to show it to one of his friends for an estimate. If it doesn't work out I may have to send it your way.
Fargo wrote: ↑April 16th, 2018, 10:14 am
Can´t help you with welding but this case looks really cool. Remembers me of the mokume gane cases of H20 Watches.
Will this case gain patina ? Looking forward to see the finished build
Thanks! The patina won't be anywhere near as dramatic as a solid bronze case but yes it has done some since I first got it. What I'm looking forward too though is how it will look after an acid etch to emphasize the layers.
Re: Need Lugbar Microwelding/soldering services
Posted: June 24th, 2018, 7:26 pm
by Luminor
Mokume-gane? Can you share the source for these cases?
Re: Need Lugbar Microwelding/soldering services
Posted: June 26th, 2018, 4:12 pm
by bronzerai
Luminor wrote: ↑June 24th, 2018, 7:26 pm
Mokume-gane? Can you share the source for these cases?
Ordered the mokume from a company in US as bar stock, then sent it over to Adrian to be milled back when he first released his Damascus cases. Been making glacial progress on this since.

Re: Need Lugbar Microwelding/soldering services
Posted: June 26th, 2018, 5:48 pm
by Luminor
I wanted to make a mokume-gane watch for years. Please keep pictures as the project progresses. Would love to see how it ends.
Re: Need Lugbar Microwelding/soldering services
Posted: July 6th, 2018, 5:16 am
by Emilio
Re: Need Lugbar Microwelding/soldering services
Posted: October 14th, 2019, 9:21 pm
by TimemiT
Any movement on this build ... be nice to see this mokume gane in it's final finish
Re: Need Lugbar Microwelding/soldering services
Posted: October 14th, 2019, 11:55 pm
by bronzerai
TimemiT wrote: ↑October 14th, 2019, 9:21 pm
Any movement on this build ... be nice to see this mokume gane in it's final finish
Check it out
here