Page 1 of 1

Angelus SF 240 seconds pin

Posted: March 10th, 2019, 5:23 pm
by ssclassa80
Hi all, I have an SF 240 I purchased a while ago from Buddha Jones. It looks like the seconds pin is about flush with the front plane of the movement. Is this typical or has mine been trimmed?


Sent from my iPhone using Tapatalk Pro

Re: Angelus SF 240 seconds pin

Posted: March 10th, 2019, 5:31 pm
by Tanukjaju
99% of non Panirai converted 240s come recessed from the main plate (but slightly protruding from the jewel) . I think I’ve personally seen one with the seconds subseconds function.

Re: Angelus SF 240 seconds pin

Posted: March 10th, 2019, 7:46 pm
by ssclassa80
Tanukjaju wrote:99% of non Panirai converted 240s come recessed from the main plate (but slightly protruding from the jewel) . I think I’ve personally seen one with the seconds subseconds function.
Thanks Tan, that’s what I thought.
So I can safely mount a non seconds dial without modifying any part of the movement, correct?



Sent from my iPhone using Tapatalk Pro

Re: Angelus SF 240 seconds pin

Posted: March 10th, 2019, 8:14 pm
by TimemiT
you should be Ok .. it is only when you use 3pcs dials ... you then need a taller secs hand