Homage Forum

toofsy wrote:

hako wrote: ↑March 22nd, 2021, 5:56 pm Great!
Let us know how it is.

Yes... I'm curious to see if we can put a 6497 inside, the mouvement holder seems wide...let us know

For sure, I’ll report back once I have it in hand.


Sent from my iPhone using Tapatalk

There is a 44mm mini fiddy no crown guard case on that Ali site. That would make for an interesting build.

It says a maximum dial size of 35.4mm and a standard 649x is 36.6mm so my guess is that it won`t work. Might be wrong info on Ali, though.

I found a complete watch with the same/similar NH35 case, there is more view to see more details about the shape, not too bad, except the lugs which need to be drill
https://fr.aliexpress.com/item/10050018 ... KuGrz&mp=1

That does not look the same at all, similar, but much bulkier and with a more angular look than the nice soft cushion shape of the other one. Also a less pleasing bezel...

Looks like Alpha case for 24 Euro



https://alpha-1993.com/collections/watch-cases?page=2

ASCIWhite wrote: ↑March 23rd, 2021, 10:47 am It says a maximum dial size of 35.4mm and a standard 649x is 36.6mm so my guess is that it won`t work. Might be wrong info on Ali, though.

I think same. NH35 is 27.40mm and stem offset is different

Kp0y wrote:

ASCIWhite wrote: ↑March 23rd, 2021, 10:47 am It says a maximum dial size of 35.4mm and a standard 649x is 36.6mm so my guess is that it won`t work. Might be wrong info on Ali, though.

I think same. NH35 is 27.40mm and stem offset is different

What about the 44mm luminor dials? Those are 34-35mm


Sent from my iPhone using Tapatalk

No... Not even close.

Kp0y wrote: ↑March 23rd, 2021, 1:02 pm Looks like Alpha case for 24 Euro



https://alpha-1993.com/collections/watch-cases?page=2

Now compare photos to the new set, and you will see.