Homage Forum

That bracelet only works with that watch head!

Sent from my iPhone using Tapatalk

Old jackson Dumbo midcase reshapping
last stage with 1200 grit sandpaper

toofsy wrote: ↑July 26th, 2019, 4:06 am Old jackson Dumbo midcase reshapping
last stage with 1200 grit sandpaper

IMG_20190726_090312.jpg

Looks promising!

Yoda wrote: ↑July 26th, 2019, 4:38 am

toofsy wrote: ↑July 26th, 2019, 4:06 am Old jackson Dumbo midcase reshapping
last stage with 1200 grit sandpaper

IMG_20190726_090312.jpg

Looks promising!

Thanks boss...
Impossible to press the bezel with the original gasket...maybe too much sanded down on the top area...however it works without the gasket...do I have to add GS hypo cement?

I have to order T25 plexi, reshape the CG, solder the brass NW tube, order a solid CB...

toofsy wrote:

Yoda wrote: ↑July 26th, 2019, 4:38 am

toofsy wrote: ↑July 26th, 2019, 4:06 am Old jackson Dumbo midcase reshapping
last stage with 1200 grit sandpaper

IMG_20190726_090312.jpg

Looks promising!

Thanks boss...
Impossible to press the bezel with the original gasket...maybe too much sanded down on the top area...however it works without the gasket...do I have to add GS hypo cement?

I have to order T25 plexi, reshape the CG, solder the brass NW tube, order a solid CB...

IMG_20190726_121326.jpg

IMG_20190726_121010.jpg

Yes, a bit of sealant would be a good idea.


Maybe teflon tape could work too? (Don't quote me on this)

[mention]emilio[/mention]

Asciiwhite would even be less niminy-piminy and recommend silicon to glue it on

mellons wrote: ↑July 25th, 2019, 6:53 am Another mm build, this time stainless steel.

Latest project before dial and hands changes, after gasket changes and crown gasket mod, crown reshape. Cg pin also slightly worked

tafari wrote: ↑July 24th, 2019, 1:47 pm

Yoda wrote:

tafari wrote: ↑July 24th, 2019, 12:06 pm

a very good work M., any plan for a build?

The one in the middle is a work for a member here and I hope that the one to the right will be sold to the interested party I discussed the details with.

The last one is a project, but it will be a full blown SW incabloc rebuilt with gen parts soon.

all the to are nice ones, waiting for the 3. with gen parts to see I guess it will be a beauty too

It will be an extensive conversion, it's a nice orphan KW non incabloc alarm movement and I plan to make it a SW incabloc non alarm movement. Thanks to Erlendh for this $100 movement!
I made the intermediate bridge for the stem and setting parts recently, having it plated next week.

I believe that I bought some of the last gen parts available for the SF240 a few years back. Now that I also have found the high cannon pinion/hour wheel set I can build a helicopter! LOL!

Yoda wrote:It will be an extensive conversion, it's a nice orphan KW non incabloc alarm movement and I plan to make it a SW incabloc non alarm movement. Thanks to Erlendh for this $100 movement!
I made the intermediate bridge for the stem and setting parts recently, having it plated next week.

It was my pleasure, glad I finally was able to help you with something, after so many years with things the other way around.