Page 52 of 525
Re: What are you working on now?
Posted: January 16th, 2020, 1:46 pm
by tafari
NortON wrote: ↑January 16th, 2020, 12:51 pm
Working
20200116_194510-01.jpeg
20200116_194459-01.jpeg
20200116_212651-01.jpeg
great result
Re: What are you working on now?
Posted: January 17th, 2020, 12:47 pm
by NortON
tafari wrote: ↑January 16th, 2020, 1:46 pm
NortON wrote: ↑January 16th, 2020, 12:51 pm
Working
20200116_194510-01.jpeg
20200116_194459-01.jpeg
20200116_212651-01.jpeg
great result
Thank you friend!
How do I deal with soldering ...
Re: What are you working on now?
Posted: January 17th, 2020, 1:45 pm
by tafari
NortON wrote: ↑January 17th, 2020, 12:47 pm
tafari wrote: ↑January 16th, 2020, 1:46 pm
NortON wrote: ↑January 16th, 2020, 12:51 pm
Working
20200116_194510-01.jpeg
20200116_194459-01.jpeg
20200116_212651-01.jpeg
great result
Thank you friend!
How do I deal with soldering ...
it is not so hard, if you have a good solder fluid. clean everything very well, put some fluid there, heat the case and if it have the right heat, use the solder wire and finish
Re: What are you working on now?
Posted: January 20th, 2020, 10:22 am
by NortON
tafari wrote: ↑January 17th, 2020, 1:45 pm
NortON wrote: ↑January 17th, 2020, 12:47 pm
tafari wrote: ↑January 16th, 2020, 1:46 pm
great result
Thank you friend!
How do I deal with soldering ...
it is not so hard, if you have a good solder fluid. clean everything very well, put some fluid there, heat the case and if it have the right heat, use the solder wire and finish
Thanks bud! It was easy
20200120_093451-01.jpeg
20200120_093415-01.jpeg
20200120_093148-01.jpeg
20200120_093159-01.jpeg
20200120_133014-01.jpeg
Re: What are you working on now?
Posted: January 20th, 2020, 10:39 am
by Emilio
[mention]NortON[/mention] nice job!
Re: What are you working on now?
Posted: January 20th, 2020, 11:07 am
by NortON
Emilio wrote: ↑January 20th, 2020, 10:39 am
@NortON nice job!
Thank you, Emilio.
Re: What are you working on now?
Posted: January 21st, 2020, 3:18 am
by NortON
final...
20200121_071509-01.jpeg
20200121_071500-01.jpeg
20200121_071452-01.jpeg
20200121_071438-01.jpeg
20200121_085346-01.jpeg
Re: What are you working on now?
Posted: January 21st, 2020, 3:34 am
by Emilio
NortON wrote: ↑January 21st, 2020, 3:18 am
final...
20200121_071509-01.jpeg
20200121_071500-01.jpeg
20200121_071452-01.jpeg
20200121_071438-01.jpeg
20200121_085346-01.jpeg
You have achieved perfection. That's the perfect amount of soldering around the lugs.
Re: What are you working on now?
Posted: January 21st, 2020, 4:45 am
by NortON
Emilio wrote: ↑January 21st, 2020, 3:34 am
NortON wrote: ↑January 21st, 2020, 3:18 am
final...
20200121_071509-01.jpeg
20200121_071500-01.jpeg
20200121_071452-01.jpeg
20200121_071438-01.jpeg
20200121_085346-01.jpeg
You have achieved perfection. That's the perfect amount of soldering around the lugs.
Thanks Emilio!
Re: What are you working on now?
Posted: January 21st, 2020, 5:59 am
by NortON
Emilio wrote: ↑January 21st, 2020, 3:34 am
That's the perfect amount of soldering around the lugs.
I cleaned the excess of tin with soldering iron, it turns out very carefully.