Page 356 of 534
Re: What are you working on now?
Posted: February 1st, 2023, 8:14 pm
by Sevanata
efstathiou.stefa wrote:wwwEvgeny wrote:Sevanata wrote: ↑January 29th, 2023, 11:12 pm
A crystal clear plexi from the master Kp0y...
Thanks Alex... Perfect fit.
Sent from my VOG-L29 using Tapatalk
every time I see this case on Ali I always feel temptation

bravo!!
I have the same case.What it this bracelet you have?
Στάλθηκε από το Redmi Note 8 Pro μου χρησιμοποιώντας Tapatalk
That's rep rolex bracelet with shape end links.
Sent from my VOG-L29 using Tapatalk
Re: What are you working on now?
Posted: February 1st, 2023, 8:57 pm
by jrlmsla
EP.- wrote:How do you clean now the dial?
Alcohol and a warm towel.
Re: What are you working on now?
Posted: February 1st, 2023, 11:27 pm
by EP.-
jrlmsla wrote: ↑February 1st, 2023, 8:57 pm
EP.- wrote:How do you clean now the dial?
Alcohol and a warm towel.
Thank you!!
Re: What are you working on now?
Posted: February 2nd, 2023, 3:41 am
by wwwEvgeny
One more box with toy )) previous was from cnc mold plastic pressed, this one looks like rubber mold from hand finished model

Re: What are you working on now?
Posted: February 2nd, 2023, 10:41 am
by toofsy
It shouldn't be my priority at this time but I start to work on my Fiftyfive Fathoms project. Base on the Rduane homage, I disassembling all the parts, remove the glass insert (without success to keep it safe), start to polishe the case (with the pics I see that there is a lots of work). And I tried to remove the bezel...one more time witout success.
My plan his to be able to swicth the bezel for a wider one, if I able to turn a new one and success to remove the stock bezel
Firstly, I'm going to make a new plexi insert, looking for a acrylic glass in 29,7mm, built a custom dial and later custom the caseback to get one in two parts.
IMG_20230202_163528.jpg
IMG_20230202_155711.jpg
IMG_20230202_161523.jpg
IMG_20230202_150631.jpg
Re: What are you working on now?
Posted: February 2nd, 2023, 10:56 am
by Yoda
I removed the bezel on one of those a few years ago, it's press fit on the click thing and there is a retaining spring in between that usually breaks.
Put a hell of a pressure with a case knife and it will come off. The flat side of the knife against the case so you don't damage it.
Re: What are you working on now?
Posted: February 2nd, 2023, 11:17 am
by toofsy
Yoda wrote: ↑February 2nd, 2023, 10:56 am
I removed the bezel on one of those a few years ago, it's press fit on the click thing and there is a retaining spring in between that usually breaks.
Put a hell of a pressure with a case knife and it will come off. The flat side of the knife against the case so you don't damage it.
Thanks M, I'm going to try the knife, I just afraid as I completely wrap and destroy my last attempt on a similar construction (PAM024 style)
Re: What are you working on now?
Posted: February 2nd, 2023, 11:28 am
by toofsy
Bingo...and the winner is Mickael...thank you
@Yoda
IMG_20230202_182525.jpg
Re: What are you working on now?
Posted: February 2nd, 2023, 11:35 am
by Yoda
toofsy wrote: ↑February 2nd, 2023, 11:28 am
Bingo...and the winner is Mickael...thank you @Yoda
IMG_20230202_182525.jpg
I told you so, congratulations! It looks as if nothing was broken, lucky you in that case!
Re: What are you working on now?
Posted: February 2nd, 2023, 10:51 pm
by wwwEvgeny
Slowly... move...