Re: What are you working on now?
Posted: December 28th, 2022, 10:26 am
Gesendet von meinem Mi 9 Lite mit Tapatalk
Homage Forum
For people that enjoy all watches
https://homage-forum.com/
What are you working on now?
Page 348 of 534
Re: What are you working on now?
Posted: December 30th, 2022, 8:46 am
Ploppy homage, not ready yet but it's almost a watch at least
Gesendet von meinem Mi 9 Lite mit Tapatalk
Gesendet von meinem Mi 9 Lite mit Tapatalk
Re: What are you working on now?
Posted: January 1st, 2023, 7:33 am
Not exactly watch related stuff, but it can be enjoyed with a favourite watch while sitting on the porch during summer.
Restored my grandfather's humidifier, refinished the hinges, polished the lacquer and went over the red cedar inside with a fine grit sandpaper.
Restored my grandfather's humidifier, refinished the hinges, polished the lacquer and went over the red cedar inside with a fine grit sandpaper.
Re: What are you working on now?
Posted: January 1st, 2023, 8:54 am
Yoda wrote: ↑January 1st, 2023, 7:33 am Not exactly watch related stuff, but it can be enjoyed with a favourite watch while sitting on the porch during summer.
Restored my grandfather's humidifier, refinished the hinges, polished the lacquer and went over the red cedar inside with a fine grit sandpaper.
20230101_132059_resized.jpg20230101_132041_resized.jpg
Re: What are you working on now?
Posted: January 2nd, 2023, 2:47 am
Let’s get ready to rumble.
Re: What are you working on now?
Posted: January 3rd, 2023, 6:18 am
Elgin size 37S, grade 471 from 1923.
Re: What are you working on now?
Posted: January 3rd, 2023, 7:22 am
Just finished:
Case: AliE
Crown: Raffles
Dial: Belkin
Hands: River
Movement: ST 3600
Strap: Belkin (handmade)
Case: AliE
Crown: Raffles
Dial: Belkin
Hands: River
Movement: ST 3600
Strap: Belkin (handmade)
Re: What are you working on now?
Posted: January 3rd, 2023, 8:59 am
AWESOME!dj57 wrote:Just finished:
Case: AliE
Crown: Raffles
Dial: Belkin
Hands: River
Movement: ST 3600
Strap: Belkin (handmade)
Re: What are you working on now?
Posted: January 3rd, 2023, 1:11 pm
Re: What are you working on now?
Posted: January 3rd, 2023, 1:22 pm
Hi,
Many thanks.
You’re right, the raffle crown with 0,9 mm thread.
The adapter I use is 1.2 - 0.9 mm. So it fits to the stem and the Raffles crown.
Regarding the length: yes, stem and adapter have to be adapted, shortened etc. You have to do this step by step by adapting both is small steps.
But at the end no issues.