Homage Forum

OMG! Again something to thinking about nice idea

Amuthon this is Can you share process:)

I always wanted to have a B-Uhr that is not as big as my LACO Hommage ….

… and more accurate than my flieger with sub seconds.

So I changed my spares parts and I found a watch case (not that nice), a Molnija “Ural” wristwatch with 3608 Movement, a type B dial and some hands…





… so let’s get started…













I know the movement has to be cleaned and regulated but first things first. Also if I am going to like the result then I am planning a little a vintage mod on dial and hands. You know „a little mod, why not“.

Brother, be awarw that all 3608 movements have the shattering effect on the seconds hand. This means that you will see at some positions the hand to jumb 2-3 seconds. But that's all right.

Elias Livadaris wrote:Brother, be awarw that all 3608 movements have the shattering effect on the seconds hand. This means that you will see at some positions the hand to jumb 2-3 seconds. But that's all right.

Ευχαριστώ
I know this but many thanks for keeping me/us informed.

Just tighten the spring under the seconds hand pinion and all is good. Be careful when you set the seconds hand, it can compromise the tension on the spring.

Yoda wrote:Just tighten the spring under the seconds hand pinion and all is good. Be careful when you set the seconds hand, it can compromise the tension on the spring.

Dial and hands vintage mod done

dj57 wrote: ↑October 31st, 2022, 9:25 am Dial and hands vintage mod done

Perfect!

Dj57 I watch very carefully, you did a great job, congratulations