What are you working on now?

[Kp0y]

Great great straps buddy!
Tell us more about the cases

1. NW 3646
2. NW 3646
3. NW California
4. Emilio designed, Shapeway printed 3652
5. Emilio designed, Shapeway printed bronze California
6. Emilio designed, Shapeway printed bronze 3646

Wow you got the shapeways 3652 that clean, looks like normal ss

It took some time to shape it and remove traces from printing, also risky on CG hole. Top and bottom walls are too thin and need to be gentle with shaping/sanding/polishing.

Beside this you need all other parts and works to add/do.

Brass crown tube (soldered), crownguard lever with pin was hand made.
Crownguard holes drilled and tapped.
Lugs holes drilled and 1.8mm lugs soldered.
Movement holder fixing pin made and soldered to drilled hole in the case.
Bezel, plexi, movement holder, caseback, lead gaskets all made by me

[Mike08]

1. NW 3646
2. NW 3646
3. NW California
4. Emilio designed, Shapeway printed 3652
5. Emilio designed, Shapeway printed bronze California
6. Emilio designed, Shapeway printed bronze 3646

Wow you got the shapeways 3652 that clean, looks like normal ss

It took some time to shape it and remove traces from printing, also risky on CG hole. Top and bottom walls are too thin and need to be gentle with shaping/sanding/polishing.

Beside this you need all other parts and works to add/do.

Brass crown tube (soldered), crownguard lever with pin was hand made.
Crownguard holes drilled and tapped.
Lugs holes drilled and 1.8mm lugs soldered.
Movement holder fixing pin made and soldered to drilled hole in the case.
Bezel, plexi, movement holder, caseback, lead gaskets all made by me

Ok, i see its smth for the master-builder...
But it also sounds like some great kp0y-exclusives - excited

[Emilio]

1. NW 3646
2. NW 3646
3. NW California
4. Emilio designed, Shapeway printed 3652
5. Emilio designed, Shapeway printed bronze California
6. Emilio designed, Shapeway printed bronze 3646

Wow you got the shapeways 3652 that clean, looks like normal ss

It took some time to shape it and remove traces from printing, also risky on CG hole. Top and bottom walls are too thin and need to be gentle with shaping/sanding/polishing.

Beside this you need all other parts and works to add/do.

Brass crown tube (soldered), crownguard lever with pin was hand made.
Crownguard holes drilled and tapped.
Lugs holes drilled and 1.8mm lugs soldered.
Movement holder fixing pin made and soldered to drilled hole in the case.
Bezel, plexi, movement holder, caseback, lead gaskets all made by me

Thanks for letting us know how to proceed with the 3652.

If you have any suggestions like last, please, let me know by PM

[dj57]

Just finished my new Fliegeruhr, B-Uhr…

[Emilio]

Just finished my new Fliegeruhr, B-Uhr…

It looks mint! nicely done

[Yoda]

As good as it gets!

[dj57]

Thanks a million.

[Denis]

Just finished my new Fliegeruhr, B-Uhr…

Dear Friend very nice B uhr build:) Can you ask some details about dimension, 44mm or biggest..Where you buy dial and hands?

[dj57]

Just finished my new Fliegeruhr, B-Uhr…

Dear Friend very nice B uhr build:) Can you ask some details about dimension, 44mm or biggest..Where you buy dial and hands?

Thanks Denis,
This is a low budget and very easy to build B-Uhr.
All parts are from eBay except the leather strap.
It’s 45mm without crown.

The only that I had to wait and then change were the hands.
See below:

Movement: ST 3620
I‘ll send you the eBay links via pm.

[rustyscoot]

Currently having a break but been on the lathe making anonymous Ratchet Wheels for Cort 616s.