Homage Forum

Denis wrote: ↑April 8th, 2022, 12:48 pm

Tanukjaju wrote: ↑April 8th, 2022, 10:18 am

Denis wrote: ↑April 7th, 2022, 12:02 pm


Ebay 47mm case and dial. Dial refurbished.. UT6497 swiss just service. Ataya old hands..Only lacks the strap..

Clean build! The movement is cleaner than most UTs I’ve seen!

Thanks:)
But screw for lugs is very poor quality.. I'm not satisfied with 2 pices lugs and screw.. My next plan make new one pices lug and welding it.. In that case I will change mineral glass with plexi.. But I'm not sure is good plan, because is this case is very cheap, and I don't have experience with soldering..

Is the slot for the head very wide? I used to have a narrow but really blunt screwdriver for that purpose. It helps

Clean build! The movement is cleaner than most UTs I’ve seen!
[/quote]

Thanks:)
But screw for lugs is very poor quality.. I'm not satisfied with 2 pices lugs and screw.. My next plan make new one pices lug and welding it.. In that case I will change mineral glass with plexi.. But I'm not sure is good plan, because is this case is very cheap, and I don't have experience with soldering..
[/quote]

Is the slot for the head very wide? I used to have a narrow but really blunt screwdriver for that purpose. It helps
[/quote]

Thanks for good advice, I try with blunt and stronger screwdriver:) Post photo with strap:)

Denis wrote: ↑April 8th, 2022, 12:48 pm

Tanukjaju wrote: ↑April 8th, 2022, 10:18 am

Denis wrote: ↑April 7th, 2022, 12:02 pm


Ebay 47mm case and dial. Dial refurbished.. UT6497 swiss just service. Ataya old hands..Only lacks the strap..

Clean build! The movement is cleaner than most UTs I’ve seen!

Thanks:)
But screw for lugs is very poor quality.. I'm not satisfied with 2 pices lugs and screw.. My next plan make new one pices lug and welding it.. In that case I will change mineral glass with plexi.. But I'm not sure is good plan, because is this case is very cheap, and I don't have experience with soldering..

I use blue Loctite to secure the screws.

Thanks Yoda:) But screw for lugs is very poor quality.. I use little oil d5 but screw thread is very rough.. Unfortunately I don't have thread tool for make good thread.. Tomorrow I try with stronger screwdriver..

Kkstraps wrote: ↑April 8th, 2022, 12:36 pm

NortON wrote: ↑April 8th, 2022, 10:02 am 20220408_175032.jpg

great job as always

thx K

Hi guys. I'm working on a knife buckle. fingers erased

Kkstraps wrote: ↑April 8th, 2022, 7:56 pm Hi guys. I'm working on a knife buckle. fingers erased

Great work K!

Another Cali:

Superdome!


Sent from my refrigerator using Tapatalk...

Denis wrote: ↑April 7th, 2022, 12:02 pm


Ebay 47mm case and dial. Dial refurbished.. UT6497 swiss just service. Ataya old hands..Only lacks the strap..

I have the same case. I kept the mineral crystal but I removed the blue AR. Looks much better without it.