For people that enjoy all watches
https://homage-forum.com/
I'm only missing history part 2. If you decide to share it in the future, let me know.wwwEvgeny wrote:4 new books just added to my librarythe most detailed one....
OMGYoda wrote:Soldering my Oyang 3646.
picture please! If I can solder this the way I want it, then it will be on a strap made for me by Blueradish, a Dow Cali finished by Southy and a vintage yellow hammered 6497 or 6498, it doesn't matter which as it has a closed case back.Akvanautas wrote: ↑February 19th, 2021, 12:33 pmGreat! What parts you will use there? Solid case here
Yoda wrote: ↑February 19th, 2021, 12:48 pmIf I can solder this the way I want it, then it will be on a strap made for me by Blueradish, a Dow Cali finished by Southy and a vintage yellow hammered 6497 or 6498, it doesn't matter which as it has a closed case back.Akvanautas wrote: ↑February 19th, 2021, 12:33 pmGreat! What parts you will use there? Solid case here
Damn, the project died even before it started and I forgot...There is this thick threaded brass disk in there and it appears that it is up to the owner to have it opened up to fit a desired movement. I have no means myself and no machine shop to take care of that without smashing the threads.Akvanautas wrote: ↑February 19th, 2021, 12:49 pmYoda wrote: ↑February 19th, 2021, 12:48 pmIf I can solder this the way I want it, then it will be on a strap made for me by Blueradish, a Dow Cali finished by Southy and a vintage yellow hammered 6497 or 6498, it doesn't matter which as it has a closed case back.Akvanautas wrote: ↑February 19th, 2021, 12:33 pm
Great! What parts you will use there? Solid case here
Send it to Kp0y. He can achieve perfect result for you!Yoda wrote: ↑February 19th, 2021, 1:13 pmDamn, the project died even before it started and I forgot...There is this thick threaded brass disk in there and it appears that it is up to the owner to have it opened up to fit a desired movement. I have no means myself and no machine shop to take care of that without smashing the threads.
Expensive and exclusive anchor?
Finding a crown and crown tube to fit, threading the case, soldering...I am not a builder, don't care much about building.Akvanautas wrote: ↑February 19th, 2021, 1:20 pmSend it to Kp0y. He can achieve perfect result for you!Yoda wrote: ↑February 19th, 2021, 1:13 pmDamn, the project died even before it started and I forgot...There is this thick threaded brass disk in there and it appears that it is up to the owner to have it opened up to fit a desired movement. I have no means myself and no machine shop to take care of that without smashing the threads.
Expensive and exclusive anchor?