Homage Forum

Posted: **January 25th, 2021, 4:13 pm**

Madantique wrote: ↑January 25th, 2021, 3:00 am

Always at the top your Pam.

Posted: **January 25th, 2021, 4:22 pm**

buddhabar wrote: ↑January 25th, 2021, 4:08 pm
Yoda wrote: ↑January 25th, 2021, 3:46 pm
buddhabar wrote: ↑January 25th, 2021, 3:41 pm .
Damn pretty unusual watch! Italian watchmaking.
Thanks dear M.
True ... I confirm. Breil is an Italian brand that enjoys good acclaim here.

I dare say so, it's great! I have a Hamilton with the same twist.

Posted: **January 25th, 2021, 4:27 pm**

Sent from my LYA-L09 using Tapatalk

Posted: **January 25th, 2021, 4:39 pm**

Alhig72 wrote:

Sent from my LYA-L09 using Tapatalk

wow beautiful one

Posted: **January 25th, 2021, 5:26 pm**

Yoda wrote: ↑January 25th, 2021, 11:01 am
Madantique wrote: ↑January 25th, 2021, 10:26 am
Yoda wrote: ↑January 25th, 2021, 9:34 am

The perfect looking movement would be without the screw holding the intermediate winding wheel next to the ratchet wheel and the screw at the top keeping the barrel bridge, plus a bit polishing to the adjustment arm on the balance cock. Parts from Chile?
Please do take this as my personal opinion and a simple observation, I still do think it is a wonderful watch.
I'm not clear a bit about "without the screw holding the intermediate winding wheel next to the ratchet wheel" and yes parts from Chile, If you can give me more detail I will try to upgrade all of my 240 too.
The very shiny screw for the intermediate winding wheel is supposed to be flat and not beveled, the screw at the top (the dark one under the R) should look like the two others holding the barrel bridge.
If I remember correctly, the fat beveled screw there is used to fill out the gap, the standard screw will not work.

Thank you bro.

Posted: **January 25th, 2021, 5:45 pm**

Madantique wrote: ↑January 25th, 2021, 5:26 pm
Yoda wrote: ↑January 25th, 2021, 11:01 am
Madantique wrote: ↑January 25th, 2021, 10:26 am

I'm not clear a bit about "without the screw holding the intermediate winding wheel next to the ratchet wheel" and yes parts from Chile, If you can give me more detail I will try to upgrade all of my 240 too.
The very shiny screw for the intermediate winding wheel is supposed to be flat and not beveled, the screw at the top (the dark one under the R) should look like the two others holding the barrel bridge.
If I remember correctly, the fat beveled screw there is used to fill out the gap, the standard screw will not work.
Thank you bro.

No problem, I have (unfortunately) made some remarks on the parts from Chile in the past and it was not to my advantage, to say the least.

This is the reason why I am using genuine parts these days.

Posted: **January 25th, 2021, 6:24 pm**

Posted: **January 25th, 2021, 6:34 pm**

MWC 300m mod. Type II dial and military merc hands.

Posted: **January 25th, 2021, 7:01 pm**

ASCIWhite wrote:MWC 300m mod. Type II dial and military merc hands.

great build

Posted: **January 25th, 2021, 7:22 pm**

Thanks, man

I also redid the finish (a very boring finish from MWC) and added polished chamfer edges on the case.

Homage Forum

The perpetual wrist shot thread

Re: The perpetual wrist shot thread

Re: The perpetual wrist shot thread

Re: The perpetual wrist shot thread

Re: The perpetual wrist shot thread

Re: The perpetual wrist shot thread

Re: The perpetual wrist shot thread

The perpetual wrist shot thread

Re: The perpetual wrist shot thread

Re: The perpetual wrist shot thread

Re: The perpetual wrist shot thread