As this project is getting very exciting, I would like to contribute a buckle design I had made, back then for the rolerai's and the rolexes.
This buckle was never made as a real prototype. I have no design software anymore, so I would be happy someone to take this proto buckle and put the HF logo on.
Then, it would be my pleasure, a fellow buckle maker like [mention]straps68[/mention] to scale it and make it for the HF project. If possible, at a price appropriate. I do not want anything, but just a buckle for me. Of course, the buckle can be made to fit the appropriate strap width.
Keep going my brothers,
Elias
Let's do something exciting... Start a HF project?
- Elias Livadaris
- Sponsor
- Posts: 691
- Joined: April 11th, 2018, 6:19 am
- Location: Athens, Greece
-
Animal
5 year veteran
Frequent Flyer
VIP
Sponsor
HF veteran
Skillful builder
Good neighbour
Re: Let's do something exciting... Start a HF project?
You do not have the required permissions to view the files attached to this post.
Wins only the one who dares to try!
- Simonix
- Tinkerer
- Posts: 318
- Joined: August 19th, 2020, 7:50 am
- Location: Rutland, UK
-
Frequent Flyer
Italiano addict
Re: Let's do something exciting... Start a HF project?
Late to the party, but I am in for some of this!
Love the SeikoEGI idea, and the Zerograph.
A 44mm Mille Metri would be nice as well!
Love the SeikoEGI idea, and the Zerograph.
A 44mm Mille Metri would be nice as well!
- Emilio
- Doom Slayer
- Posts: 8556
- Joined: April 11th, 2018, 3:29 am
- Location: Spain
- Contact:
-
Mini Chat Squatter
I'm hot
Animal
5 year veteran
Frequent Flyer
Moderator
VIP
Prolific poster
HF veteran
Italiano addict
Good neighbour
Re: Let's do something exciting... Start a HF project?
Maybe in future I will provide STL files for a mille metri case.Simonix wrote:Late to the party, but I am in for some of this!
Love the SeikoEGI idea, and the Zerograph.
A 44mm Mille Metri would be nice as well!
That will take me some time so that's why I don't want to raise expectations.
Panerai reference pictures
https://mega.co.nz/#F!8R0FWaoS!IAasZXfb14Z7R1H6CLYp6w
Instagram
http://instagram.com/emisansev
IMGUR Albums
http://homage-forum.com/viewtopic.php?f=8&t=3508
https://mega.co.nz/#F!8R0FWaoS!IAasZXfb14Z7R1H6CLYp6w
http://instagram.com/emisansev
IMGUR Albums
http://homage-forum.com/viewtopic.php?f=8&t=3508
- Albatross
- VIP
- Posts: 519
- Joined: April 11th, 2018, 10:46 am
- Location: United States
-
5 year veteran
Frequent Flyer
VIP
HF veteran
Re: Let's do something exciting... Start a HF project?
Holly molly!!! I just went through some of this thread. This is awesome!!!Emilio wrote:We are discussing the possibility of getting custom parts ready to be used by just ordering from shapeways.com
In this case, a custom bezel attachment for a regular Seiko so it becomes an Egi-Seiko
Sent from my iPhone using Tapatalk
- Phaedros
- Tinkerer
- Posts: 492
- Joined: August 24th, 2020, 1:29 pm
-
Car lover
Bike lover
Knife maker
Animal
Frequent Flyer
Strap maker
Mad scientist
Good neighbour
Re: Let's do something exciting... Start a HF project?
I spent the better part of two nights on watching tutorials and came up with this. This whole 3D modeling thing is really quite fun!
Outlines are drawn off a picture of the original in Inkscape and then imported to Fusion360 where the extrusions were made...
„I asked her for gasoline, she gave me water...“
Me, side of the road, pushing my bike.
Me, side of the road, pushing my bike.
- Emilio
- Doom Slayer
- Posts: 8556
- Joined: April 11th, 2018, 3:29 am
- Location: Spain
- Contact:
-
Mini Chat Squatter
I'm hot
Animal
5 year veteran
Frequent Flyer
Moderator
VIP
Prolific poster
HF veteran
Italiano addict
Good neighbour
Re: Let's do something exciting... Start a HF project?
Yep, and you can avoid step number 1 and do everything in Fusion 360.Phaedros wrote:
I spent the better part of two nights on watching tutorials and came up with this. This whole 3D modeling thing is really quite fun!
Outlines are drawn off a picture of the original in Inkscape and then imported to Fusion360 where the extrusions were made...
Good job!
Panerai reference pictures
https://mega.co.nz/#F!8R0FWaoS!IAasZXfb14Z7R1H6CLYp6w
Instagram
http://instagram.com/emisansev
IMGUR Albums
http://homage-forum.com/viewtopic.php?f=8&t=3508
https://mega.co.nz/#F!8R0FWaoS!IAasZXfb14Z7R1H6CLYp6w
http://instagram.com/emisansev
IMGUR Albums
http://homage-forum.com/viewtopic.php?f=8&t=3508
- Emilio
- Doom Slayer
- Posts: 8556
- Joined: April 11th, 2018, 3:29 am
- Location: Spain
- Contact:
-
Mini Chat Squatter
I'm hot
Animal
5 year veteran
Frequent Flyer
Moderator
VIP
Prolific poster
HF veteran
Italiano addict
Good neighbour
Re: Let's do something exciting... Start a HF project?
I forgot to mention that I already own a modern Tudor homage, so I could test the piece.Phaedros wrote:
I spent the better part of two nights on watching tutorials and came up with this. This whole 3D modeling thing is really quite fun!
Outlines are drawn off a picture of the original in Inkscape and then imported to Fusion360 where the extrusions were made...
Panerai reference pictures
https://mega.co.nz/#F!8R0FWaoS!IAasZXfb14Z7R1H6CLYp6w
Instagram
http://instagram.com/emisansev
IMGUR Albums
http://homage-forum.com/viewtopic.php?f=8&t=3508
https://mega.co.nz/#F!8R0FWaoS!IAasZXfb14Z7R1H6CLYp6w
http://instagram.com/emisansev
IMGUR Albums
http://homage-forum.com/viewtopic.php?f=8&t=3508
- Phaedros
- Tinkerer
- Posts: 492
- Joined: August 24th, 2020, 1:29 pm
-
Car lover
Bike lover
Knife maker
Animal
Frequent Flyer
Strap maker
Mad scientist
Good neighbour
Re: Let's do something exciting... Start a HF project?
Emilio wrote: ↑February 27th, 2021, 10:35 amYep, and you can avoid step number 1 and do everything in Fusion 360.Phaedros wrote:
I spent the better part of two nights on watching tutorials and came up with this. This whole 3D modeling thing is really quite fun!
Outlines are drawn off a picture of the original in Inkscape and then imported to Fusion360 where the extrusions were made...
Good job!
I know my way around Inkscape pretty well and draw all my vector based stuff there, so I kept Fusion for the technical stuff. Fusionn is so powerful... I found the „repeat on a circle“ and the „cut one shape with the other“ options to be extremely useful.
I‘ll look into tracing bitmaps in Fusion as well... right now my brain hurts
On the Tudor replica: if you had access to a lathe to turn down the original bezel to an outside diameter of 38mm and a height of 2,5mm you could use my file instantly. There’s no soldering involved, it is held by set screws. I haven’t included holes for those yet, because I am not entirely sure how many the original had.
„I asked her for gasoline, she gave me water...“
Me, side of the road, pushing my bike.
Me, side of the road, pushing my bike.
- Emilio
- Doom Slayer
- Posts: 8556
- Joined: April 11th, 2018, 3:29 am
- Location: Spain
- Contact:
-
Mini Chat Squatter
I'm hot
Animal
5 year veteran
Frequent Flyer
Moderator
VIP
Prolific poster
HF veteran
Italiano addict
Good neighbour
Re: Let's do something exciting... Start a HF project?
I think I know someone who can turn it for me. I will contact you in the near futurePhaedros wrote: ↑February 27th, 2021, 12:54 pm
I know my way around Inkscape pretty well and draw all my vector based stuff there, so I kept Fusion for the technical stuff. Fusionn is so powerful... I found the „repeat on a circle“ and the „cut one shape with the other“ options to be extremely useful.
I‘ll look into tracing bitmaps in Fusion as well... right now my brain hurts
On the Tudor replica: if you had access to a lathe to turn down the original bezel to an outside diameter of 38mm and a height of 2,5mm you could use my file instantly. There’s no soldering involved, it is held by set screws. I haven’t included holes for those yet, because I am not entirely sure how many the original had.
Panerai reference pictures
https://mega.co.nz/#F!8R0FWaoS!IAasZXfb14Z7R1H6CLYp6w
Instagram
http://instagram.com/emisansev
IMGUR Albums
http://homage-forum.com/viewtopic.php?f=8&t=3508
https://mega.co.nz/#F!8R0FWaoS!IAasZXfb14Z7R1H6CLYp6w
http://instagram.com/emisansev
IMGUR Albums
http://homage-forum.com/viewtopic.php?f=8&t=3508
- Phaedros
- Tinkerer
- Posts: 492
- Joined: August 24th, 2020, 1:29 pm
-
Car lover
Bike lover
Knife maker
Animal
Frequent Flyer
Strap maker
Mad scientist
Good neighbour
Re: Let's do something exciting... Start a HF project?
Great news! Double check the measurements in my file though please - I just remebered I made the inner diameter of the bezel to fit the SKX crystal - this might not work with your Tudor.Emilio wrote: ↑February 27th, 2021, 2:24 pmI think I know someone who can turn it for me. I will contact you in the near futurePhaedros wrote: ↑February 27th, 2021, 12:54 pm
I know my way around Inkscape pretty well and draw all my vector based stuff there, so I kept Fusion for the technical stuff. Fusionn is so powerful... I found the „repeat on a circle“ and the „cut one shape with the other“ options to be extremely useful.
I‘ll look into tracing bitmaps in Fusion as well... right now my brain hurts
On the Tudor replica: if you had access to a lathe to turn down the original bezel to an outside diameter of 38mm and a height of 2,5mm you could use my file instantly. There’s no soldering involved, it is held by set screws. I haven’t included holes for those yet, because I am not entirely sure how many the original had.
„I asked her for gasoline, she gave me water...“
Me, side of the road, pushing my bike.
Me, side of the road, pushing my bike.