River Steel millemetri modifications

[Mellons]

You’re welcome, btw the small 7mm rubber washer came… good fit on the OD but I would maybe prefer the ID to be a tiny bit smaller…
IIRC My steel MM used the ‘spray can seal” and I’d say that is a little tighter.

BTW the o rings are I bought from AliX ( cheaper and larger quantity ) arrived before the ones I purchased locally through eBay… go figure!

Difficult to get gaskets to fit spot- one, the ‘spray can’ mod is perfect, cant locate this exact gasket however.

[Mellons]

From the archive: Stock steel millemetri with aluminium case back (and stock plexi). Not too far off a ti case set weight here (from memory esdee v2 titanium case set approx 111g head only with plexi)

[Mellons]

Stock river steel caseback


Esdee titanium caseback

Aftermarket Aluminium millemetri caseback


The aluminium caseback is the No 1 modification for wearability you can do to any of the cases, especially the bronze. @Kp0y is now making aluminium casebacks for millemetri cases.

[Kp0y]

Here are some pictures
Aluminium and bronze
Any engravings can be added

[NortON]

Here are some pictures
Aluminium and bronze
Any engravings can be added

WOW! Great work!

[heini]

You have PM, Axel !
Louis