Wearing Angelus SF240 and greeting everyone

Just joined? Tell us about yourself
Post Reply
l3506l
Super Lost Sheep
Super Lost Sheep
Posts: 51
Joined: January 4th, 2024, 7:51 pm
Location: china

Frequent Flyer

Wearing Angelus SF240 and greeting everyone

Post by l3506l »

Hello everyone, I come from China. Yes, many parts of the project that you pay tribute to are produced in China, such as boxes, dials, movements, etc.
After playing with the Panasonic replica for over a decade, I have lost interest in some ordinary movements. Last year, I spent 5 months modifying two 240 alarm clock movements and turning them into watches. At most, I had 15 self-made Panasonic, P3000,P4000,P9000,6497, 16-17 and other movements that I had played all over. As time passed, many of the people who made these projects were arrested, and many projects could not be purchased. This is regrettable
I am very happy to be here. I have seen many excellent works and learned a lot of production knowledge.
To everyone, cheers
These are the toys I made below
https://ibb.co/Dk9SKZP
https://ibb.co/nbzqRvq
https://ibb.co/SVqqKT7
https://ibb.co/cXjR57V
https://ibb.co/Dk9SKZP
https://ibb.co/160Thpq
https://ibb.co/RNPtLpc
User avatar
ZaphodDent
Super Lost Sheep
Super Lost Sheep
Posts: 59
Joined: February 22nd, 2022, 4:54 am

Frequent Flyer

Re: Wearing Angelus SF240 and greeting everyone

Post by ZaphodDent »

Hello and welcome. Nice work with your builds. A SF240 build is also on my list, but I’m still not sure if I want to butcher my alarm clock .
Are there any updates on the new case that you are involved with? That would be the moment I would try to get my SF240 built ready


Gesendet von iPhone mit Tapatalk
User avatar
Tanukjaju
Village Whore
Village Whore
Posts: 3654
Joined: April 10th, 2018, 8:29 pm

Car lover

I'm hot

Animal

5 year veteran

Frequent Flyer

Moderator

VIP

Prolific poster

HF veteran

Skillful builder

8 giorni nut

Good neighbour

Re: Wearing Angelus SF240 and greeting everyone

Post by Tanukjaju »

Nicely done and congrats!
:shifty:

Image
User avatar
Hypnogagia
Tinkerer
Tinkerer
Posts: 478
Joined: June 30th, 2023, 1:49 pm

Frequent Flyer

Re: Wearing Angelus SF240 and greeting everyone

Post by Hypnogagia »

Welcome! Beautiful builds!
I keep adding airplane parts to my motorbike but it still doesn’t fly
l3506l
Super Lost Sheep
Super Lost Sheep
Posts: 51
Joined: January 4th, 2024, 7:51 pm
Location: china

Frequent Flyer

Re: Wearing Angelus SF240 and greeting everyone

Post by l3506l »

ZaphodDent wrote: May 16th, 2024, 6:30 am Hello and welcome. Nice work with your builds. A SF240 build is also on my list, but I’m still not sure if I want to butcher my alarm clock Image.
Are there any updates on the new case that you are involved with? That would be the moment I would try to get my SF240 built ready


Gesendet von iPhone mit Tapatalk
I removed the alarm clock component and purchased a Chilean antique striped clamp board。The small second hand needs to be connected to a shaft and cannot be installed
User avatar
Nottingham
Watch Idiot
Watch Idiot
Posts: 1839
Joined: June 11th, 2019, 4:13 am

Frequent Flyer

Prolific poster

Re: Wearing Angelus SF240 and greeting everyone

Post by Nottingham »

l3506l wrote: May 16th, 2024, 2:49 am Hello everyone, I come from China. Yes, many parts of the project that you pay tribute to are produced in China, such as boxes, dials, movements, etc.
After playing with the Panasonic replica for over a decade, I have lost interest in some ordinary movements. Last year, I spent 5 months modifying two 240 alarm clock movements and turning them into watches. At most, I had 15 self-made Panasonic, P3000,P4000,P9000,6497, 16-17 and other movements that I had played all over. As time passed, many of the people who made these projects were arrested, and many projects could not be purchased. This is regrettable
I am very happy to be here. I have seen many excellent works and learned a lot of production knowledge.
To everyone, cheers
These are the toys I made below
https://ibb.co/Dk9SKZP
https://ibb.co/nbzqRvq
https://ibb.co/SVqqKT7
https://ibb.co/cXjR57V
https://ibb.co/Dk9SKZP
https://ibb.co/160Thpq
https://ibb.co/RNPtLpc
Very nice builts, 240 one seems encased in a 372/605 case, correct?
l3506l
Super Lost Sheep
Super Lost Sheep
Posts: 51
Joined: January 4th, 2024, 7:51 pm
Location: china

Frequent Flyer

Re: Wearing Angelus SF240 and greeting everyone

Post by l3506l »

Nottingham wrote: May 20th, 2024, 4:41 am
l3506l wrote: May 16th, 2024, 2:49 am Hello everyone, I come from China. Yes, many parts of the project that you pay tribute to are produced in China, such as boxes, dials, movements, etc.
After playing with the Panasonic replica for over a decade, I have lost interest in some ordinary movements. Last year, I spent 5 months modifying two 240 alarm clock movements and turning them into watches. At most, I had 15 self-made Panasonic, P3000,P4000,P9000,6497, 16-17 and other movements that I had played all over. As time passed, many of the people who made these projects were arrested, and many projects could not be purchased. This is regrettable
I am very happy to be here. I have seen many excellent works and learned a lot of production knowledge.
To everyone, cheers
These are the toys I made below
https://ibb.co/Dk9SKZP
https://ibb.co/nbzqRvq
https://ibb.co/SVqqKT7
https://ibb.co/cXjR57V
https://ibb.co/Dk9SKZP
https://ibb.co/160Thpq
https://ibb.co/RNPtLpc
Very nice builts, 240 one seems encased in a 372/605 case, correct?
372-6152 can all be installed
Post Reply