Blancpain US Navy… now within reach

Non-homage Dive Watches
Post Reply
User avatar
Fizzzz
Mad scientist
Mad scientist
Posts: 432
Joined: June 4th, 2018, 5:43 am

Re: Blancpain US Navy… now within reach

Post by Fizzzz »

@toofsy
Thank you, I already have both links,
but the only ones available are the Rhombus bezel ...
and I have no idea where to find the hands.
User avatar
Fizzzz
Mad scientist
Mad scientist
Posts: 432
Joined: June 4th, 2018, 5:43 am

Re: Blancpain US Navy… now within reach

Post by Fizzzz »

I'm experimenting a new process for white on black dials,
here are the first results
Image
I've carved a recess for the moisture indicator,
and slight recesses to ease luming work.
Still experimenting texture builup...

I was thinking that it would be easy to draw 1:1 according to MIL-W specs,
but in the end I found that the Tornek Rayville do not comply with MIL specs measurements!

@Madasboot
What's your opinion Master M?
User avatar
toofsy
Watch Addict
Watch Addict
Posts: 722
Joined: July 20th, 2018, 11:01 am

Re: Blancpain US Navy… now within reach

Post by toofsy »

@Fizzzz
:thumbup:

The classic insert came back in stock this morning...
IconRays - aNYstrap - Ateliers d'Embellie
User avatar
Fizzzz
Mad scientist
Mad scientist
Posts: 432
Joined: June 4th, 2018, 5:43 am

Re: Blancpain US Navy… now within reach

Post by Fizzzz »

toofsy wrote: January 29th, 2023, 6:00 am @Fizzzz
:thumbup:

The classic insert came back in stock this morning...
???
I can only see the (too small) Rhombus insert in stock,
I'd like a military insert, same as RDUANE...
madasboot
Tinkerer
Tinkerer
Posts: 304
Joined: April 19th, 2019, 2:26 am
Location: Singapore

Re: Blancpain US Navy… now within reach

Post by madasboot »

@Madasboot
What's your opinion Master M?
[/quote]

Hi S.
They look beautiful.
Two or three considerations; first of them conceptual.
These dials (american) were printed and suppliers where plenty, fact that explains slight variations among the three or four batches produced.
Lume was applied over a flat surface (contrarily to the swiss counterparts which were curved dials in their majority) so there is no need to carve the indices because they should have a white printed background.
The carved indices were usually to get more radium in and had the purpose of a lume box with a first layer of zync oxide, reflective to enhance glow.
Originally these dials had a straightforward build, flat, white printed and matte.
The recess for the litmus can make sense so in case of swelling by moisture, not compromising the functionality of the watch (hour hand overhead).
Summing, I find its not necessary to carve the indices and it does not present any advantage, especially for luming.
Last aspect is that the available cases (rep) have different dial tolerances and openings; the one dissected by @Mir36 has admittance for a 28.5mm dial and an opening of 27.5 but vietnamese cases have a different construction and are made for Schild movements.
Anyway, brilliant results!
Best
M.
User avatar
toofsy
Watch Addict
Watch Addict
Posts: 722
Joined: July 20th, 2018, 11:01 am

Re: Blancpain US Navy… now within reach

Post by toofsy »

Fizzzz wrote: January 29th, 2023, 6:05 am
toofsy wrote: January 29th, 2023, 6:00 am @Fizzzz
:thumbup:

The classic insert came back in stock this morning...
???
I can only see the (too small) Rhombus insert in stock,
I'd like a military insert, same as RDUANE...
3 available at the time of the screenshot...
Screenshot_2023-01-29-13-55-57-720_com.alibaba.aliexpresshd.jpg
You do not have the required permissions to view the files attached to this post.
IconRays - aNYstrap - Ateliers d'Embellie
User avatar
Fizzzz
Mad scientist
Mad scientist
Posts: 432
Joined: June 4th, 2018, 5:43 am

Re: Blancpain US Navy… now within reach

Post by Fizzzz »

madasboot wrote: January 29th, 2023, 6:22 am @Madasboot
Hi S.
They look beautiful.
Two or three considerations; first of them conceptual.
These dials (american) were printed and suppliers where plenty, fact that explains slight variations among the three or four batches produced.
Hi M.
Do you think that Tornek dials were printed in USA?
As far as I understood, Blancpain was doing most of the parts.
Tornek was originally just a reseller and they built a workshop just to comply with Buy American Act.
I've read a funny fact on this: according to BAA, contractors had to buy US jewels, but Tornek found that Swiss ones were definitely better. So Tronek was buying US jewels, but didn't use these! :crazy:

Another point: I've seen Blancpain military watches auctionned, some had Tornek engravings inside caseback...
Anyway, MIL-W-22176A design and measurements are far from actual dials.
madasboot wrote: January 29th, 2023, 6:22 am Lume was applied over a flat surface (contrarily to the swiss counterparts which were curved dials in their majority) so there is no need to carve the indices because they should have a white printed background.
The carved indices were usually to get more radium in and had the purpose of a lume box with a first layer of zync oxide, reflective to enhance glow.
Originally these dials had a straightforward build, flat, white printed and matte.
The recess for the litmus can make sense so in case of swelling by moisture, not compromising the functionality of the watch (hour hand overhead).
Summing, I find its not necessary to carve the indices and it does not present any advantage, especially for luming.
Sure, gens indices were not carved,
probably not a problem for you, but this slight recess is a great help for my poor luming skills and shouldn't be visible once lumed ;)

Looking closer to ref pics, it seems like all gens had a recess for Moisture indicator.
Image

@Mir36 can you please confirm 27.5mm dial opening on RDUANE watch?
Last edited by Fizzzz on January 29th, 2023, 8:21 am, edited 1 time in total.
User avatar
Fizzzz
Mad scientist
Mad scientist
Posts: 432
Joined: June 4th, 2018, 5:43 am

Re: Blancpain US Navy… now within reach

Post by Fizzzz »

toofsy wrote: January 29th, 2023, 6:56 am
Fizzzz wrote: January 29th, 2023, 6:05 am
toofsy wrote: January 29th, 2023, 6:00 am @Fizzzz
:thumbup:

The classic insert came back in stock this morning...
???
I can only see the (too small) Rhombus insert in stock,
I'd like a military insert, same as RDUANE...
3 available at the time of the screenshot...
Screenshot_2023-01-29-13-55-57-720_com.alibaba.aliexpresshd.jpg
Thanks for pics, but these are the Rhombus ones ...
User avatar
Mir36
VIP
VIP
Posts: 438
Joined: June 13th, 2018, 1:49 am

Re: Blancpain US Navy… now within reach

Post by Mir36 »

Fizzzz wrote: January 29th, 2023, 8:18 am @Mir36 can you please confirm 27.5mm dial opening on RDUANE watch?
@Fizzzz Actual measurements here… :mrgreen:
Image
Image
Image
Image
My PreVs, PreAs and more: viewtopic.php?f=8&t=6554
PreV and PreA cases: viewtopic.php?f=8&t=6652
PreV dials: viewtopic.php?f=8&t=6651
User avatar
Fizzzz
Mad scientist
Mad scientist
Posts: 432
Joined: June 4th, 2018, 5:43 am

Re: Blancpain US Navy… now within reach

Post by Fizzzz »

@Mir36
thank you for these exhaustive measurements, so dial openining = 27mm, will be helpfull to improve design :thumbup:
Post Reply