Spare parts for your Ploprof homage

Non-homage Dive Watches
Post Reply
User avatar
Emilio
Doom Slayer
Doom Slayer
Posts: 8556
Joined: April 11th, 2018, 3:29 am
Location: Spain
Contact:

Spare parts for your Ploprof homage

Post by Emilio »

Thanks to [mention]Roberespi[/mention] for contacting the seller and making this possible.

A collection of Steeldive parts for replacing on your Ploprof homage. Right now you can get the CG, bezel insert and dial.

I've been told that sterile parts might be available too.

:arrow: https://a.aliexpress.com/_BP6DHp

:thumbup:
Roberespi
Super Lost Sheep
Super Lost Sheep
Posts: 25
Joined: February 24th, 2019, 1:24 am

Spare parts for your Ploprof homage

Post by Roberespi »

[emoji122][emoji122][emoji122][emoji122] take care about the measurements:

Ceramic bezel size: 40.90*31.70*1.00mm(exterior diameter*interior diameter*thickness)

Surface size: 32.8*32.5*31.5*0.4mm (wire hole*face diameter*open Surface * thickness)

Bezel size: 41.8*32.7*2.2mm (outer diameter * inner diameter * thickness)


Enviado desde mi iPhone utilizando Tapatalk
Roberespi
Super Lost Sheep
Super Lost Sheep
Posts: 25
Joined: February 24th, 2019, 1:24 am

Re: Spare parts for your Ploprof homage

Post by Roberespi »

If someone needs a ploprof v1 case i have a spare one, pm to me


Enviado desde mi iPhone utilizando Tapatalk
User avatar
Emilio
Doom Slayer
Doom Slayer
Posts: 8556
Joined: April 11th, 2018, 3:29 am
Location: Spain
Contact:

Re: Spare parts for your Ploprof homage

Post by Emilio »

Roberespi wrote:[emoji122][emoji122][emoji122][emoji122] take care about the measurements:

Ceramic bezel size: 40.90*31.70*1.00mm(exterior diameter*interior diameter*thickness)

Surface size: 32.8*32.5*31.5*0.4mm (wire hole*face diameter*open Surface * thickness)

Bezel size: 41.8*32.7*2.2mm (outer diameter * inner diameter * thickness)


Enviado desde mi iPhone utilizando Tapatalk
That's great. Will come in handy [emoji846]
User avatar
Mellons
Chief bottle washer
Chief bottle washer
Posts: 4226
Joined: April 11th, 2018, 6:59 am

Re: Spare parts for your Ploprof homage

Post by Mellons »

Roberespi wrote: January 14th, 2021, 7:22 am If someone needs a ploprof v1 case i have a spare one, pm to me


Enviado desde mi iPhone utilizando Tapatalk
Have you taken one apart? Would be interesting to see parts...
"Ah, I'd love to wear a rainbow every day,
And tell the world that everything's OK,
But I'll try to carry off a little darkness on my back,
'Till things are brighter, I'm the Man In Black."

http://www.homage-forum.com/viewtopic.php?t=27
Roberespi
Super Lost Sheep
Super Lost Sheep
Posts: 25
Joined: February 24th, 2019, 1:24 am

Spare parts for your Ploprof homage

Post by Roberespi »

I started the ploppy project, but a new finished ploprof appears and i had buy it. If someone has the patience to continue the project, we can talk. I am in Spain.

The only parts that i not have is the DWO and the bezel insert (the one in the photos is not the correct one), too i have the swiss eta 2836 and the 3 wheels to make longer the hands axle.

It is v1 parts except the dial witch is a v2 one (no happy feet in it)

Image


Enviado desde mi iPhone utilizando Tapatalk
User avatar
CROCCODILEMERRY
Centurion
Centurion
Posts: 141
Joined: April 10th, 2019, 3:06 am

Re: Spare parts for your Ploprof homage

Post by CROCCODILEMERRY »

Do you sell the dial?
Roberespi
Super Lost Sheep
Super Lost Sheep
Posts: 25
Joined: February 24th, 2019, 1:24 am

Re: Spare parts for your Ploprof homage

Post by Roberespi »

It is all sold, sorry


Enviado desde mi iPhone utilizando Tapatalk
Post Reply