Benrus 3061 Bullitt Movement DR2F3 Lift Angle?

Thrasher · Post by **Thrasher** » August 15th, 2019, 5:45 pm

Anyone have any idea what the lift angle is for a Benrus 3061 Bullitt Movement DR2F3 ? Hacking movement Yes

Thank You in Advance

Thrasher · Post by **Thrasher** » August 15th, 2019, 6:38 pm

Post by **unreformed66** » August 15th, 2019, 8:32 pm

It should be an ETA 2372 so 52 degrees.

Thrasher · Post by **Thrasher** » August 16th, 2019, 2:02 am

unreformed66 wrote: ↑August 15th, 2019, 8:32 pm It should be an ETA 2372 so 52 degrees.

Thank You, I did figure out its a 2372 but never found a definitive lift angle

Here you see it's clearly marked 2372 under balance wheel

Post by **unreformed66** » August 16th, 2019, 4:51 am

A 30 second Google search go me this. Lots of info in it.

https://watchguy.co.uk/cgi-bin/lift_angles

Thrasher · Post by **Thrasher** » October 6th, 2019, 4:24 pm

unreformed66 wrote: ↑August 16th, 2019, 4:51 am A 30 second Google search go me this. Lots of info in it.

https://watchguy.co.uk/cgi-bin/lift_angles

Assuming its the same as a ETA 2370 or ETA 2373 then the lift should be 52

Homage Forum