Panerai watches and its movements

Share experiences and specs of different watch movements
User avatar
Emilio
Doom Slayer
Doom Slayer
Posts: 8556
Joined: April 11th, 2018, 3:29 am
Location: Spain
Contact:

Mini Chat Squatter

I'm hot

Animal

5 year veteran

Frequent Flyer

Moderator

VIP

Prolific poster

HF veteran

Italiano addict

Good neighbour

Re: Panerai watches and its movements

Post by Emilio »

hako wrote:Ahh, never looked at the WL in this way. Very interesting hypothesis. Indeed, hard to understand why you should continue to develop a 3646 once you have a case with proper lugs and a CG.
What puzzled me most is the placement of the 2533 dial.
I was always under the impression that this belonged to the earliest dials in the first place. In fact, Perezcope mentions in one of his IG posts that he believes that the Vacheron Dealer Panerai modeled it on a very early VC Disco Volante:

Image
Some say it would be a good way to get rid of unused stock.

Sounds very Paneraish to me.
kilowattore wrote:Once agreed that Richemont isnt reliable, I think we can all have our say and consider it "right" :)
The 2533 is a puzzle yes... maybe an early sandwich prototype?
It could be a late redesign of the original "3 6 9 12" sandwich dial in order to reduce the glow in the dark area of the lume. That way it would be less noticeable for enemy patrols.
kilowattore
VIP
VIP
Posts: 878
Joined: April 11th, 2018, 3:40 pm

5 year veteran

Frequent Flyer

VIP

HF veteran

Italiano addict

Oyster eater

Seiko specialist

Re: Panerai watches and its movements

Post by kilowattore »

Emilio wrote: September 16th, 2018, 6:03 am
hako wrote:Ahh, never looked at the WL in this way. Very interesting hypothesis. Indeed, hard to understand why you should continue to develop a 3646 once you have a case with proper lugs and a CG.
What puzzled me most is the placement of the 2533 dial.
I was always under the impression that this belonged to the earliest dials in the first place. In fact, Perezcope mentions in one of his IG posts that he believes that the Vacheron Dealer Panerai modeled it on a very early VC Disco Volante:

Image
Some say it would be a good way to get rid of unused stock.

Sounds very Paneraish to me.
kilowattore wrote:Once agreed that Richemont isnt reliable, I think we can all have our say and consider it "right" :)
The 2533 is a puzzle yes... maybe an early sandwich prototype?
It could be a late redesign of the original "3 6 9 12" sandwich dial in order to reduce the glow in the dark area of the lume. That way it would be less noticeable for enemy patrols.
Possible. But if that was the case then why going back to 3-6-9 design for later 6152/1?
User avatar
TotesLegit
VIP
VIP
Posts: 32
Joined: July 26th, 2018, 12:06 am

VIP

HF veteran

Good neighbour

Re: Panerai watches and its movements

Post by TotesLegit »

hako wrote: September 13th, 2018, 9:52 am What‘s your opinions on this?
I think he's taken information from discussions several of us have had, both publicly and privately, regarding the research we've done over the years, and presented it as his own independent research. On the other hand, he put a lot of effort on the presentation, so good for him there.

Anyway, on the subject of California dials, if I were to speculate, IMHO they're later era transit dials (for the thinner 3646 types) that Panerai intended to replace with their own dials once they were received, and that's probably what they did for most of them. The box of unused California dials that was known to be in the stock of Old Panerai around the time of the Cartier transition is a good indicator of this.

On the baton "2533" dial, I agree that it's a later experimental dial, but we've been saying that for years. It probably replaced a warped rivet dial that came out of Ferretti's 2533. I'm curious about how many of the baton dials there actually are (I've only seen the 2533 and the other 3646 that has one).
User avatar
Emilio
Doom Slayer
Doom Slayer
Posts: 8556
Joined: April 11th, 2018, 3:29 am
Location: Spain
Contact:

Mini Chat Squatter

I'm hot

Animal

5 year veteran

Frequent Flyer

Moderator

VIP

Prolific poster

HF veteran

Italiano addict

Good neighbour

Re: Panerai watches and its movements

Post by Emilio »

kilowattore wrote:
Emilio wrote: September 16th, 2018, 6:03 am
hako wrote:Ahh, never looked at the WL in this way. Very interesting hypothesis. Indeed, hard to understand why you should continue to develop a 3646 once you have a case with proper lugs and a CG.
What puzzled me most is the placement of the 2533 dial.
I was always under the impression that this belonged to the earliest dials in the first place. In fact, Perezcope mentions in one of his IG posts that he believes that the Vacheron Dealer Panerai modeled it on a very early VC Disco Volante:

Image
Some say it would be a good way to get rid of unused stock.

Sounds very Paneraish to me.
kilowattore wrote:Once agreed that Richemont isnt reliable, I think we can all have our say and consider it "right" :)
The 2533 is a puzzle yes... maybe an early sandwich prototype?
It could be a late redesign of the original "3 6 9 12" sandwich dial in order to reduce the glow in the dark area of the lume. That way it would be less noticeable for enemy patrols.
Possible. But if that was the case then why going back to 3-6-9 design for later 6152/1?
They didn't like it?
Post Reply