****Necky perpetual offerings****

NOTE: Joe is still catching up with pending work, so we advise to wait until everything is settled.

Parts design and fabrication

https://facebook.com/pages/category/Jew ... 968187295/
Post Reply
User avatar
neckyzips
Tinkerer
Tinkerer
Posts: 353
Joined: April 11th, 2018, 11:30 am
Location: usa
Contact:

****Necky perpetual offerings****

Post by neckyzips »

Gen spec lug bars, well almost the tube is 0.5mm larger in diameter and a safety ping has been placed. (1:1) are available if needed.
25.00 a set
Image

Tall cp sets for 3 piece gen dials

-Molly 125.00 105.00 with exchange of existing cp hr
Image

-649x 125.00 105.00 with exchange of existing cp hr
Image

-custom made with your cp and hr for other mvts. all are made for 6497 hands unless otherwise specified
125.00 with exchange of existing cp hr
Vintage Pam plates

-Brass nos 45.00
Image

-Brass aged 65.00
Image

-Aluminum 45.00
Image

-Reverse engraved plexi with alu backing plate 65.00
Image

Custom plate orders welcome price varies on complexity

Rolex work as well, builds, custom bezels, etc.
engravings custom serial number vintage and modern 60.00
Image
Image

Custom case sets made to fit your old pocket watch from your grandfather :D
Image

Coming soon:
Anodized 3 piece dials and custom text option price to be determined
Image

-Steel hands price to be determined

-Custom sandwich style dials price varies on finish and complexity

-other offerings will be posted as they come available, ie complete vintage spec builds, new parts, ect. If it's posted here it is available for immediate shipping.

this not a complete listing of offering, just the ones that are stocked and ready for shipment, other services, machining, builds, custom engraving Ie lug engraving, case back engraving etc, and custom mods are still being offered.
User avatar
Luminor
VIP
VIP
Posts: 974
Joined: April 11th, 2018, 10:09 am

Re: ****Necky perpetual offerings****

Post by Luminor »

Great offers. Will bookmark and keep this in mind.
3646, gen. dial 3 of 3, coming soon.
3646, gen. dial 2 of 3, http://www.homage-forum.com/viewtopic.php?f=8&t=82
3636, gen. dial 1 of 3, http://www.homage-forum.com/viewtopic.php?f=8&t=35
davdew
VIP
VIP
Posts: 61
Joined: April 11th, 2018, 12:56 am

Re: ****Necky perpetual offerings****

Post by davdew »

Nice work Joe :thumbup:
Plasmon
VIP
VIP
Posts: 76
Joined: May 1st, 2018, 4:16 am

Re: ****Necky perpetual offerings****

Post by Plasmon »

Cannot be happier with Joe's engraving:

Image
User avatar
spade_lt
VIP
VIP
Posts: 451
Joined: April 26th, 2018, 1:22 pm
Contact:

Re: ****Necky perpetual offerings****

Post by spade_lt »

neckyzips wrote: April 20th, 2018, 7:53 am -649x 125.00 105.00 with exchange of existing cp hr
Image
Sorry, if answer is obvious to others, but what height are these?
Thank you.
norskguru88
Sponsor
Sponsor
Posts: 626
Joined: April 11th, 2018, 2:16 pm

Re: ****Necky perpetual offerings****

Post by norskguru88 »

Which pocket watch movement does the case fit?

Sent from my Redmi Note 5 Pro using Tapatalk

User avatar
neckyzips
Tinkerer
Tinkerer
Posts: 353
Joined: April 11th, 2018, 11:30 am
Location: usa
Contact:

Re: ****Necky perpetual offerings****

Post by neckyzips »

Cp hr sets are made for 2mm thick gen construction dials, as for h4 h6 etc i wouyhave to calculate it.

What ccase are you refering too?
User avatar
spade_lt
VIP
VIP
Posts: 451
Joined: April 26th, 2018, 1:22 pm
Contact:

Re: ****Necky perpetual offerings****

Post by spade_lt »

So considering the height spacing of the factory parts, that should be something like H6 :)

I'll just leave this here for future reference:

H?____CP____HW
H1___2.65___1.65 (for 0.4mm dials)
H2___3.00___2.00 (for 0.75mm dials)
H3___3.15___2.15 (for 0.9mm dials)
H4*__3.50___2.50 (for 1.25mm dials)
...
H6___~4.3___~3.3 (neckyzips; for 2mm dials)


__________________________
* as found from factory on Bulova 16AC and maybe other 6497 variations which did use domed dials.
Post Reply